Edelbrock E-force Owner's thread and FAQs (Frequently Asked Questions) - Page 145 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

umpadupa · 01-20-2017, 04:37 PM

cool! thought it was just mine haha, maybe its just the cold weather here.

Thanks buddy!

Quote:

Originally Posted by BigFatFlip

Mine did during start-up for a min or so and would go away once I start moving.

Silverfox · 01-20-2017, 05:06 PM

Quote:

Originally Posted by umpadupa

Anyone hear some belt squeaking on their set up?

On start up randomly and then goes away.

Sent from my iPhone using Tapatalk

dejahboi · 01-21-2017, 07:47 PM

I got to the very very end of the install and I came upon this connector. Where does it go? It's off the tmap harness. The harness is short so the connector is near. By the look of the instructions it should be directly behind the intake manifold sensor, but I don't see it all.

I'll take it apart tomorrow to see if I have anything left behind. Side note I forgot to hook up the green connector to the alternator. So many need to come off again.

BigFatFlip · 01-22-2017, 01:17 AM

Quote:

Originally Posted by dejahboi

I got to the very very end of the install and I came upon this connector. Where does it go? It's off the tmap harness. The harness is short so the connector is near. By the look of the instructions it should be directly behind the intake manifold sensor, but I don't see it all.

Is this the connector that branches off the TMAP Sensor (labeled "MAP Engine Harness connector" in the manual on page 7)? If it is, that should be plugging into the MAP harness (see step 161).

Quote:

Originally Posted by dejahboi

I'll take it apart tomorrow to see if I have anything left behind. Side note I forgot to hook up the green connector to the alternator. So many need to come off again.

No need to take it apart. Just loosen and gently lift. Be careful not to pull the manifold forward or side to side as you may risk tearing the intake gaskets.

dejahboi · 01-22-2017, 02:53 AM

Name: TMAP connector.JPG
Views: 1498
Size: 37.6 KB

@BigFatFlip

Here's a picture of where I'm having trouble.

I got the harness hooked up to the according to step 161/164. Its the other end where I'm having trouble.

Is the TMAP sensor tucked underneath the SC?

BigFatFlip · 01-22-2017, 03:15 AM

Quote:

Originally Posted by dejahboi

Here's a picture of where I'm having trouble.

I got the harness hooked up to the according to step 161/164. Its the other end where I'm having trouble.

Is the TMAP sensor tucked underneath the SC?

This is the TMAP sensor (red circle). Should be attached to one of the runners.

dejahboi · 01-22-2017, 03:35 AM

Quote:

Originally Posted by BigFatFlip

This is the TMAP sensor (red circle). Should be attached to one of the runners.

Sorry I was referring to the other MAP connector.

So it's the MAP connector I'm having trouble connecting/finding.

Sent from my SAMSUNG-SM-G935A using Tapatalk

BigFatFlip · 01-22-2017, 10:43 AM

Quote:

Originally Posted by dejahboi

Sorry I was referring to the other MAP connector.

So it's the MAP connector I'm having trouble connecting/finding.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Then that needs to go to the connector that was originally plugged into the stock MAP sensor on the stock intake.

dejahboi · 01-22-2017, 01:27 PM

Quote:

Originally Posted by BigFatFlip

Then that needs to go to the connector that was originally plugged into the stock MAP sensor on the stock intake.

Yeah noob move on my part lmao. I tucked that connector towards the front when we lowered the SC in. I went back last night with a flash light and bam, unused connecter tucked away.

Anyways, install is not complete lol. Now to go drive it and get some logs lol

Sent from my SAMSUNG-SM-G935A using Tapatalk

BigFatFlip · 01-22-2017, 03:09 PM

Quote:

Originally Posted by dejahboi

Yeah noob move on my part lmao. I tucked that connector towards the front when we lowered the SC in. I went back last night with a flash light and bam, unused connecter tucked away.

Anyways, install is not complete lol. Now to go drive it and get some logs lol

Man... discount pricing AND tech support? I should have charged you more...

dejahboi · 01-22-2017, 09:06 PM

Quote:

Originally Posted by BigFatFlip

Man... discount pricing AND tech support? I should have charged you more...

Haha! Thanks for the good deals!

So I'm now running Delicious

. Finding open roads to get logs is terrible up here lol

Xxyion · 01-23-2017, 01:43 PM

Quote:

Originally Posted by dejahboi

Haha! Thanks for the good deals!

So I'm now running Delicious

. Finding open roads to get logs is terrible up here lol

nah just drive down to walnut creek and go through tassajara =D

dejahboi · 01-23-2017, 04:15 PM

Quote:

Originally Posted by Xxyion

nah just drive down to walnut creek and go through tassajara =D

Took your advice and I was able to do my 2k to redline pulls

.

Now just waiting on the revised tune.

paiceyfan · 01-23-2017, 04:56 PM

Just got my latest Delicious Tune Revision...We probably have a similar set-up.😁

Sent from my XT1031 using Tapatalk

01-21-2017, 07:47 PM	#2019
dejahboi Senior Member Join Date: Oct 2016 Drives: 13 FRS - Boosted Location: Sacramento Posts: 107 Thanks: 15 Thanked 41 Times in 27 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I got to the very very end of the install and I came upon this connector. Where does it go? It's off the tmap harness. The harness is short so the connector is near. By the look of the instructions it should be directly behind the intake manifold sensor, but I don't see it all. I'll take it apart tomorrow to see if I have anything left behind. Side note I forgot to hook up the green connector to the alternator. So many need to come off again. Last edited by dejahboi; 01-21-2017 at 08:44 PM.

01-22-2017, 02:53 AM	#2021
dejahboi Senior Member Join Date: Oct 2016 Drives: 13 FRS - Boosted Location: Sacramento Posts: 107 Thanks: 15 Thanked 41 Times in 27 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	@BigFatFlip Here's a picture of where I'm having trouble. I got the harness hooked up to the according to step 161/164. Its the other end where I'm having trouble. Is the TMAP sensor tucked underneath the SC? Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vortech Owner Thread & Setup Questions	reyruiz191	Forced Induction	340	05-17-2022 12:44 PM
Edelbrock E-Force Supercharger	itsibarra	Forced Induction	938	07-31-2021 04:48 PM
Most annoyingly over-asked questions on FT86 forums	mit_peid	Off-Topic Lounge [WARNING: NO POLITICS]	36	01-16-2014 02:48 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) -- General Topics	0	05-24-2012 10:09 PM

User Name		Remember Me?
Password