New ProTEKt skidplate kit for the Scion FRS RS1

[mitch t]

Originally Posted by MikoV

After a few weeks of constant beating and nasty driveways it seems like the skid plates itself didn't take any damage..the quality of the plastic used is like no other. I think this will protect my lip for eternity.

I don't think I'll ever run out of this lol.



Sent from my SM-G930T using Tapatalk

Thanks.

Yea the material is super specific. we did a bunch of testing to figure out what the best stuff is to make them out of, and we ended up going with High Density Polyethylene.

It is a lot more expensive than some of our other options, but we use it for 2 reasons.

1. It is super slippery, and slides with less effort than anything else we tried, which reduces the force trying to pull the bumper off the car during the scrape.

2. It's wear properties are amazing. I don't think that you could wear a set out, even after years of use. (I've never had anyone ask for a replacement yet, and some of them have been out there for 3 years or so)

[mitch t]

Hey guys,

I'm running an FT86club exclusive sale on all of our products for the 86 twins.

you can check it out here,

http://www.ft86club.com/forums/showthread.php?t=113820

[mitch t]

Bump!

[mitch t]

Sale bump!

[canyons]

Originally Posted by MikoV

Super happy with my protekt plates! Scraped them like crazy and didn't even have to worry about my lip. Definitely worth the price.

Thanks protekt. They also have REALLY GOOD CUSTOMER SERVICE!





Sent from my SM-G930T using Tapatalk

That looks like West End Alignment

[mitch t]

ust a reminder that we are running a sale on all ProTEKt skidplates for the FRS and BRZ, over in the classified section.

quantites are limited so get them now!

http://www.ft86club.com/forums/showthread.php?t=113820

[ELNseven]

Originally Posted by mitch t

ust a reminder that we are running a sale on all ProTEKt skidplates for the FRS and BRZ, over in the classified section.

quantites are limited so get them now!

http://www.ft86club.com/forums/showthread.php?t=113820

make any for an aimgain front bumper?

[mitch t]

I don't have any specifically for the Aimgain bumper, but it looks like the regular FRS parts might be a good fit.

Anybody with an Aimgain lip in the Los Angeles area, so I can get a look at it?

[mitch t]

Originally Posted by MikoV

After a few weeks of constant beating and nasty driveways it seems like the skid plates itself didn't take any damage..the quality of the plastic used is like no other. I think this will protect my lip for eternity.

I don't think I'll ever run out of this lol.



Sent from my SM-G930T using Tapatalk

Thanks!

You will likely never wear them out. we make them out of High Density Polyethelene, which is $pendy but has great wear characteristics.

Also, we will be rolling out a lifetime warranty on all skidplates in the next few weeks, that will apply to any past customers as well. You will never need to buy a replacement, as long as you own your car.

[mjanmohammad]

Will these fit on the 2017 BRZ with the STI lip?


Sent from my iPhone using Tapatalk

[mitch t]

Originally Posted by mjanmohammad

Will these fit on the 2017 BRZ with the STI lip?


Sent from my iPhone using Tapatalk

Not yet!

I'm looking for a 2017 BRZ in the Los Angeles area for prototype work, though.

if you know anyone, send them my way!!

[mikko86]

Just to make sure...Does it require drilling? Or it uses existing holes?

[mitch t]

Originally Posted by mikko86

Just to make sure...Does it require drilling? Or it uses existing holes?

Yup, drilling is required for the RS1.

The lip kit doesn't have any holes in it for me to use.

[Teclis]

How will these fit the JDM TRD lip?
And how is the Shipping to Norway? :p