Freed Engineering Whiteout FR-S - SSR SP1 18x9 +38 - Scion FR-S Forum | Subaru BRZ Forum | Toyota 86 GT 86 Forum | AS1 Forum

Freed Engineering · 06-20-2012, 07:09 PM

Just got some wheels for our shop FR-S. They are 3 piece SSR SP1

Sizing is 18x9 +38 with 255/35-18s all around.

This size is spot on! I will be changing the rear wheel sizing just a tiny bit but it's basically a great setup.

Now running Fortune Auto coilovers.

I took it to the track last weekend and decided it was time to start upgrading. It does great in stock form, but def could use a bit of help.

- Mainly with the tires and brakes. Well get to HP adders soon..........

Let me know what you think!!

- Billy

LivingLegend · 06-20-2012, 07:12 PM

It doesn't look too bad! I personally not a fan of polished lips on wheels. And what exhaust are you running since I only see a single exit?

Freed Engineering · 06-20-2012, 09:27 PM

Quote:

Originally Posted by LivingLegend

It doesn't look too bad! I personally not a fan of polished lips on wheels. And what exhaust are you running since I only see a single exit?

Yea the wheels will be changed soon.

The exhaust is custom built by us. We will be releasing it for sale soon. Single exit cat back.

Do Boy · 06-20-2012, 10:43 PM

An pics of it straight on from the rear? Looks like it pokes out a little? I planed on getting 18*9.5 +38 in the rear. Just want to get an idea of how it's going to look

Freed Engineering · 06-20-2012, 10:46 PM

Quote:

Originally Posted by Do Boy

An pics of it straight on from the rear? Looks like it pokes out a little? I planed on getting 18*9.5 +38 in the rear. Just want to get an idea of how it's going to look

Yea I'll get some better pics tomorrow.

*KID* · 06-21-2012, 12:44 AM

nice to see some 255s, wonder how it will sit once its dropped.

DarrenDriven · 06-21-2012, 02:28 AM

Added to the Wheel Directory:
http://www.ft86club.com/forums/showthread.php?t=7535

empower-auto · 06-21-2012, 10:45 AM

Is this a good fit that will clear the fenders?

Freed Engineering · 06-21-2012, 06:25 PM

Quote:

Originally Posted by empower-auto

Is this a good fit that will clear the fenders?

It pokes out a tiny bit. If it was lowered it would need a bit of camber to sit in, which is what I will be doing.

dnjshin0bi · 06-21-2012, 07:06 PM

Quote:

Originally Posted by Freed Engineering

It pokes out a tiny bit. If it was lowered it would need a bit of camber to sit in, which is what I will be doing.

Could you please post some more photos from these angles:

1. Front viewing the car longitudinally
2. Rear " "
3. Front at a slight angle as per 1.
4. Rear " " as per 2.
5. Close up of front and rear fenders showing rim & tyre

Cheers!

Freed Engineering · 06-21-2012, 10:04 PM

Updated. Sorry, she's a lil dirty.

Freed Engineering · 06-21-2012, 10:20 PM

Quote:

Originally Posted by just86

wow those headlights makes this car look like a POS ricer

Lol, thanks for the input.

Do Boy · 06-21-2012, 10:49 PM

Does the rear go out past the fender?

Freed Engineering · 06-22-2012, 09:05 AM

Quote:

Originally Posted by Do Boy

Does the rear go out past the fender?

It does a tiny bit. You can tell from the pics.

Matt Andrews · 06-22-2012, 10:59 AM

what tire is that? wondering if the section width is different than the one I tried (NT01). I would not have thought that a +38 would have worked without significant rubbing at full lock. to add to the picture requests, can you stick the camera back into the wheel well to take a picture of how much space you have between the tire and the spring?

dori. · 06-23-2012, 02:50 PM

Quote:

Originally Posted by Do Boy

An pics of it straight on from the rear? Looks like it pokes out a little? I planed on getting 18*9.5 +38 in the rear. Just want to get an idea of how it's going to look

near mexi

considering he's slightly poking here (which IMHO isn't 'spot on'), adding a 1/4" on both sides of your wheel isn't going to help you. Might rub on the inside too.

Perhaps it boils down to the tire, since this guy has 255's all around; if you stretch it might fit better

CoRi J · 06-23-2012, 10:12 PM

I think I'm the rare car enthusiast breed that is finding all of the customizations looking great on this car so far, I like the single exhaust idea on it!

OldSkool86 · 06-23-2012, 10:54 PM

Damn, looks like a roll and pull needed? Or gonna rub plenty sick...wheels look good tho

Freed Engineering · 06-24-2012, 12:04 AM

Quote:

Originally Posted by Matt Andrews

what tire is that? wondering if the section width is different than the one I tried (NT01). I would not have thought that a +38 would have worked without significant rubbing at full lock. to add to the picture requests, can you stick the camera back into the wheel well to take a picture of how much space you have between the tire and the spring?

It is the nt555. I'm going to change the wheel barrels and tire sizing a bit. I'll get some pics for you.

There's definitely plently of room between the spring and wheel. No rubbing.

Quote:

Originally Posted by dori.

near mexi

considering he's slightly poking here (which IMHO isn't 'spot on'), adding a 1/4" on both sides of your wheel isn't going to help you. Might rub on the inside too.

Perhaps it boils down to the tire, since this guy has 255's all around; if you stretch it might fit better

Smaller tires would work better, but I didn't want sunken fitment. After I lower it it will work out perfect. I'll post pics for you in the future. Tons of room in the rear for a 10" wide.

Quote:

Originally Posted by CoRi J

I think I'm the rare car enthusiast breed that is finding all of the customizations looking great on this car so far, I like the single exhaust idea on it!

Thank you!! I personally love it. And you won't be able to beat this setup when it comes to cost and weight reduction when we release it for sale.

Quote:

Originally Posted by OldSkool86

Damn, looks like a roll and pull needed? Or gonna rub plenty sick...wheels look good tho

No pull needed maybe a slight roll. Like I said I'll post pics when I get the suspension setup in a week or so.

dori. · 06-24-2012, 05:01 PM

Definitely looking forward to it!

Freed Engineering · 06-25-2012, 10:48 AM

Quote:

Originally Posted by Matt Andrews

what tire is that? wondering if the section width is different than the one I tried (NT01). I would not have thought that a +38 would have worked without significant rubbing at full lock. to add to the picture requests, can you stick the camera back into the wheel well to take a picture of how much space you have between the tire and the spring?

Here are some pics

NickD · 06-26-2012, 01:28 PM

Some of my favorite wheels! Can't wait to see this thing on coilovers

06-20-2012, 07:09 PM	#1
Freed Engineering Join Date: May 2012 Drives: FR-S Location: Gambrills, MD Posts: 120 Thanks: 48 Thanked 71 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Freed Engineering Whiteout FR-S - SSR SP1 18x9 +38 Just got some wheels for our shop FR-S. They are 3 piece SSR SP1 Sizing is 18x9 +38 with 255/35-18s all around. This size is spot on! I will be changing the rear wheel sizing just a tiny bit but it's basically a great setup. Now running Fortune Auto coilovers. I took it to the track last weekend and decided it was time to start upgrading. It does great in stock form, but def could use a bit of help. - Mainly with the tires and brakes. Well get to HP adders soon.......... Let me know what you think!! - Billy Last edited by Freed Engineering; 08-01-2012 at 09:51 AM.

06-21-2012, 12:44 AM	#6
KID 86-er Join Date: May 2012 Drives: Scion FRS Location: Laredo, TX Posts: 640 Thanks: 100 Thanked 119 Times in 91 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	nice to see some 255s, wonder how it will sit once its dropped. __________________ 2013 Scion FRS - Firestorm Red 6MT/ DDPR Tuned/ WORKS DIF/ PERRIN Intake Tube/ Motiv HFC Front Pipe/ Motiv Overpipe/ Whiteline Subframe bushings/ MOTUL fluids/ Beat Sonic Shark Fin/ My Journal

06-22-2012, 10:59 AM	#15
Matt Andrews Senior Member Join Date: May 2012 Drives: race cars Location: Newport Beach, CA Posts: 247 Thanks: 31 Thanked 145 Times in 68 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	what tire is that? wondering if the section width is different than the one I tried (NT01). I would not have thought that a +38 would have worked without significant rubbing at full lock. to add to the picture requests, can you stick the camera back into the wheel well to take a picture of how much space you have between the tire and the spring? __________________ 11/19/12 - Just back from Redline TimeAttack's demo event. Video and write up in link below. http://fecompetition.wordpress.com/ https://www.facebook.com/FECompetition

06-23-2012, 10:54 PM	#18
OldSkool86 Member Join Date: Mar 2012 Drives: Corolla Location: Los Angeles, CA Posts: 44 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Damn, looks like a roll and pull needed? Or gonna rub plenty sick...wheels look good tho __________________ Comiingle

06-24-2012, 05:01 PM	#20
dori. Señor Member Join Date: Dec 2011 Drives: '13 Subaru BRZ L 6MT (SWP) Location: Rockland, NY Posts: 1,330 Thanks: 578 Thanked 262 Times in 192 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Definitely looking forward to it! __________________ twitter \| instagram \| #nicetwins tumblr photoblog

06-20-2012, 07:12 PM	#2
LivingLegend Senior Member Join Date: Mar 2010 Drives: 1994 Toyota Tercel Location: Hillsboro Posts: 232 Thanks: 283 Thanked 62 Times in 39 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	It doesn't look too bad! I personally not a fan of polished lips on wheels. And what exhaust are you running since I only see a single exit?

06-21-2012, 10:04 PM	#11
Freed Engineering Join Date: May 2012 Drives: FR-S Location: Gambrills, MD Posts: 120 Thanks: 48 Thanked 71 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Updated. Sorry, she's a lil dirty.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Emotion Kiwami - 18x9.5 on Subaru BRZ	RavSpec	Wheels \| Tires \| Spacers \| Hub	156	04-22-2013 10:51 PM
Freed Engineering FR-S	Freed Engineering	Member's Car Journals	28	08-01-2012 11:54 AM
Freed Engineering - Five Axis dealer	Freed Engineering	Exterior Parts (Aero, Lighting, Etc.)	11	06-17-2012 05:36 PM
Freed Engineering shop car featured in Modified Mag	Freed Engineering	Off-Topic Lounge	0	06-08-2012 10:04 AM
Freed Engineering custom metal fabrication and parts development	bFreed	Announcements, Contests, Giveaways	23	03-24-2012 02:35 AM

User Name		Remember Me?
Password