opti coat + clear bra

[wallace03]

would it be wise/suggested to opti coat your car and then get clear bra? im thinking about getting it done on the side to protect it from people that might try to key my car. also is 3M the best choice for clear bra?

[Fish]

You can't put a clear bra over the opticoat. It can't adhere to it. You would need to put the bra first, then opticoat.

[eikond]

Opticoat then clear bra then gloss plastidip, then wrap in cellophane, then cover in white shipping plastic, then enclose in shipping container and place in a pole barn. Then maybe it will be safe from rock chips!

[7thgear]

/thread

[Reflections]

Originally Posted by Fish

You can't put a clear bra over the opticoat. It can't adhere to it. You would need to put the bra first, then opticoat.

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

[Fish]

Originally Posted by Reflections

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

Ah, thanks. I was going off memory from what Mike told me.

[wallace03]

Thanks. i think i will go get my car detailed, then opti coated. not sure if i want to pay for clear bra though.

[CU2MIKE]

Originally Posted by Reflections

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

Thanks! I remembered wrong

[Hamza7]

Wrong Wrong Wrong.

- Opti Coat
- Clear Bra
- Opti Coat
- Permanon Platinum 3-4/year

Don't try to anal rape the car in front, try to fall back or get a car in front of you if there's a dump truck carrying any type of debris...

That's how you avoid rock chips and even then there's a chance for them "attacking"...

Remember there's no shame in driving your car like a car but it never hurts to be extra pre-cautious.

[BRZ88]

How about xpel ultimate films? Opti coat them clear bra? I think I read somewhere that xpel ultimate films are not recommended with opti coat.

[ubersoph]

Need to add "Don't smash into cones"

[bryansbestwax]

Originally Posted by Reflections

Incorrect. The opti-Coat doesn't prevent adhesion of the clear bra.

Chris@Optimum: Yes, it will be fine and cause no problems. You can use a solvent as usual to prep and go ahead as you normally do. Now, if you remove a clear bra that had OC applied up to, but not under the edges you will have to compound down the line and reapply to the area. You can also apply OC directly to the clearbra material to maintain a fresh new look that will not fade/yellow.

Source: http://www.detailingbliss.com/forum/...protection.htm

I dont disagree fully but i have had 2 cutomers have ahesion issues especially on smaller fender pieces. I would suggest after bra install to ne 100% sure. Thats just from experience. I have done about 70 opticoats and only 2 out of 30 had issues with the clearbra afterwards

[BRZ88]

Originally Posted by bryansbestwax

I dont disagree fully but i have had 2 cutomers have ahesion issues especially on smaller fender pieces. I would suggest after bra install to ne 100% sure. Thats just from experience. I have done about 70 opticoats and only 2 out of 30 had issues with the clearbra afterwards

If opticoat is applied AFTER the clear bra installation (xpel ultimate), can they overlap? or would you have to opticoat all parts of the car BUT the areas that are protected with clear bra?

[bryansbestwax]

If its the ultimate i would tape off the bra and do only the paint. Opticoat may affect the self healimg properties that are in the bra layer

[Aznek]

Originally Posted by Hamza7

Wrong Wrong Wrong.

- Opti Coat
- Clear Bra
- Opti Coat
- Permanon Platinum 3-4/year

Don't try to anal rape the car in front, try to fall back or get a car in front of you if there's a dump truck carrying any type of debris...

That's how you avoid rock chips and even then there's a chance for them "attacking"...

Remember there's no shame in driving your car like a car but it never hurts to be extra pre-cautious.

I spoke with Jeff at AudioHeaven today and he told me they cannot install it over Opti-coat, said it wouldn't stick...

[Hamza7]

Originally Posted by Aznek

I spoke with Jeff at AudioHeaven today and he told me they cannot install it over Opti-coat, said it wouldn't stick...

Do you happen to know what brand of wrap he is using?

[Aznek]

http://www.audioheaven.ca/ventureshield.html
Venture shield

[bryansbestwax]

Ya ventureshield has issues. The two customerw both went venturreshiele. My last poat ia a bit wrong. I did two before installs ans they both had issues. The others had it applier right after install.

[Aznek]

What would you recommend in place of Venture Shield?

[bryansbestwax]

I dont think it matters. Just do it after install

[rawbz]

Originally Posted by Hamza7

Do you happen to know what brand of wrap he is using?

Do different brands have different ability to stick to opti-coat? Which brand is best , 3M?

Anyone know a good installer in GTA?

[brianc]

Just don't follow people so close on the freeway. Works for me.. Was never a fan of Opti Coat. It's like permanent wax for lazy people. I love waxing my car.