Scion First 86 FR-S Winners Registry

[MarkRacerX]

Originally Posted by Dadhawk

They are real CF.

I've decided I'm going to take a photo of my car and turn the plate into a picture frame for my office. Shouldn't be too difficult.

Great Idea !!!

[Dadhawk]

Originally Posted by VZ86

That sounds like a great idea! I wanted to display my frame in my office, but that giant empty space in the center would have made it a bit boring.

Originally Posted by MarkRacerX

Great Idea !!!

Thanks. I played with the frame a little last night. If you are really careful, you can remove the tags on the back and relocate them to the front.

So, my plan is to get a good shot of the car, center and have it printed in a large enough format to fit the hole, relocate the "special" tags to the the bottom corners on the front of the plate, then mount the photo in the hole with a thin piece of plastic or glass and some cardboard backing. Probably will do some type of license plate mounting screws through the holes to fill in those gaps.

I also thought about find one of those places that makes speciality vanity plates to see if you could have the photo printed on a metal plate. Still doing some research on that. I bet one of those Mall kiosk places could do it (may not exist in states that require a front plate).

[M&M_Hwy9]

Finally brought ours home tonight (5/22)! Will post a thread with photos. Here's a "spy" photo we were able to sneak before the event.

[luxmn]

congrats , the night still young, take it for a ride

[M&M_Hwy9]

So, does anyone know if all 86 have ben picked up? Is this contest over?

[civicdrivr]

IIRC all First 86 cars were to be delivered no later then May 18th. I got mine, and thats all that matter to me

[_hollywood]

500 miles on mine already, sometimes i would just keep driving and lose track of time, its such a responsive car to drive.

2 questions.

Is anyone making a first 86 piece to go into the square spot behind the shifter? "cant really explain it better than that..but the square indent in the center console.....

is the number on our license plate frame our "official"number? im 56 of 86 then...and just figured we should all get together and make our own plaques with a limited run for just us first 86rs with VINs to show we are legit....

[M&M_Hwy9]

Is anyone making a first 86 piece to go into the square spot behind the shifter? "cant really explain it better than that..but the square indent in the center console.....

is the number on our license plate frame our "official"number? im 56 of 86 then...and just figured we should all get together and make our own plaques with a limited run for just us first 86rs with VINs to show we are legit....

YO _hollywood check this thread out.

Who is getting a First86 dash plaque? ( 1 2 3)

[terrypm]

Originally Posted by _hollywood

500 miles on mine already, sometimes i would just keep driving and lose track of time, its such a responsive car to drive.

2 questions.

Is anyone making a first 86 piece to go into the square spot behind the shifter? "cant really explain it better than that..but the square indent in the center console.....

is the number on our license plate frame our "official"number? im 56 of 86 then...and just figured we should all get together and make our own plaques with a limited run for just us first 86rs with VINs to show we are legit....

I started a topic on this very same question a week or so ago. I am hopeful that it will happen.

You can check it out here:
http://www.ft86club.com/forums/showthread.php?t=6703

[LostTHEbeat]

Just an FYI as I haven't seen it posted elsewhere yet - but some of the First 86 winners are featured in a couple updates to Scion's Facebook page.

[AtlantaRock]

Originally Posted by M&M_Hwy9

Is anyone making a first 86 piece to go into the square spot behind the shifter? "cant really explain it better than that..but the square indent in the center console.....

is the number on our license plate frame our "official"number? im 56 of 86 then...and just figured we should all get together and make our own plaques with a limited run for just us first 86rs with VINs to show we are legit....

YO _hollywood check this thread out.

Who is getting a First86 dash plaque? ( 1 2 3)

I email Jack and Jaycie about this and sent pictures from Toyota in Italy who had a picture of a plaque in the square indent below the shifter and cup holder. I asked if they could contact Toyota Italy and see if they could make them for us. I got a response that they have something in the works for the First 86ers but would not say what it was because they didn't want to ruin it.
I guess we wait and see

[mixminus]

I'm usually a forum stalker but wanted to include mine on the list. I have #41 in the garage and loving it. White auto. As soon as i got it and saw that space behind the shifter I immediately sent the dimensions to a friend who makes badges and trophy plates. Since i've seen a few post about the same thing i will certainly post if he comes up with something killer. Should have a render in a week or so.

[texas2888]

Took mine out for a spin Saturday looking for a good spot to take pictures. Here's the best of what I took that day. Did a little "doctoring" of the photos, but not with the color. Just took out some light poles, wires, stop signs, etc. I'm glad I stuck with Asphalt. It really glows in the sunlight!!!

[M&M_Hwy9]

Supper nice photos Texas2888!!

[Moto-P]

Any particular reason I am not listed still?

[bambbrose]

Originally Posted by Moto-P

Any particular reason I am not listed still?

Give me all your details Moto, I must have missed them.

color, trans, and dealership location please

[Moto-P]

Originally Posted by bambbrose

Give me all your details Moto, I must have missed them.

color, trans, and dealership location please

Moto-P (Moto@Club4AG)
Torrance, CA
delivered by Penske Scion of Downey
Whiteout, AT
Chassis #00348 / Delivery #2 in the USA on May 3rd, 2012.
(last to be admitted to First86 as alternate winner)

[bambbrose]

Just added you Moto-P.

If anyone else who has taken delivery wants to put up their first86 number (1 to 86), and also their Chassis #, I'll gladly add them to the first post.

[mattles]

still havent got the numbered pen/plate frame so I guess I will never know which 'number' I am of the first 86. Cool... :/
however, my chassis is #500

[Dadhawk]

#3 of 86 by number although I was not #3 to take delivery. I was the first in Georgia by a couple of days. 5/11/2012 date

Chassis #00274

[mr2lor]

#48 of 86

Asphalt 6MT
Bakersfield, CA on 5/17
Chassis #01714

[civicdrivr]

#16 of 86
Chassis #00180
Delivered 5/16