New Stage 2 UEL (91-93 and E85) OTS tune files - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

86_PWR · 12-05-2015, 07:15 PM

Quote:

Originally Posted by Griever423

Uhm, that's basically why he is doing it. He stated in his original post that he made his stage 2 tune in a way that would be compatible with other UEL's on the market. Now he's revising it for his UEL specifically.

Is your name shiv....

D_Thissen · 12-05-2015, 07:35 PM

Hopefully the new tunes will be compatible with Borla/RevWorks/Tomei etc.

phrosty · 12-05-2015, 07:46 PM

Quote:

Originally Posted by 86_PWR

Shiv
Can u plz address if u will make similar tweaks for your OTS map for EL's. U have many loyal OFT customers that chose the EL route. I am hoping u r not doing this just because u sell an UEL.

The current tunes are already generically optimized for EL/UEL. The new one is specifically optimized for the OFH.

It sounds like there are some more generic changes there that could be applicable to all the tunes, though.

LOLS2K · 12-05-2015, 07:50 PM

Quote:

Originally Posted by 86_PWR

Is your name shiv....

Captain · 12-07-2015, 08:33 PM

I'm a little confused on the update.. Is the new beta uel stage 2 91/93 oct available for those with no FI or the BPB? I apologize for the dumb question.

2much · 12-08-2015, 06:03 PM

Quote:

Originally Posted by Captain

I'm a little confused on the update.. Is the new beta uel stage 2 91/93 oct available for those with no FI or the BPB? I apologize for the dumb question.

They have not been released to anyone yet. As far as shiv has said in this thread, anything that is NOT 91oct/93oct USDM 6MT UEL will be released afterward

ss4max · 12-09-2015, 04:14 PM

OFT/OFH US 6MT 93oct user here. Interested in BETA when it becomes available.

Thanks.

FR-Slide · 12-09-2015, 04:29 PM

Just to be clear, you have to have OFH to be considered for Beta, correct? A different branded UEL is not allowed/adequate?

Will there be another beta for non-OFH UELs, or will the tune go straight to "market" after it clears OFT/OFH beta?

Shiv@Openflash · 12-09-2015, 05:19 PM

Sorry the delay guys. The logic board on my tuning laptop died over Thanksgiving. And the data on the HD wasn't recoverable until it was repaired. Not to self: Don't use applies Firevault encryption option when setting up your Macbook pro! Anyway, I have the revised Stage 2 files and they are ready for limited beta release.

Best Test Requirements:
-You must have both the Openflash header, OFT and stock airbag. Replacement drop-in panel filters and cat-back/over-pipe/mid-pipe upgrades are just fine.

-You must have a USDM 6MT since we will only supply beta Stage 2 OFH files for calibration IDs ending in C (at this time)

-You must know how to record, download and email me a data log file

-You must use premium grade name-brand (Chevron, Shell, 76, etc,.) fuel. Not Costco, Rotten Robby, Arco, etc,.

-And all beta testing results are to be kept private between you and us via email. This means no posting data logs or trouble-shooting questions on the forum. It's a beta test after all!

So if you think you meet these requirements, please email me at shiv@openflashperformance.com. Please put "Stage 2 OFH beta test" in the subject line. And please copy and past the above requirements into your email and say "I meet these requirements!" Also, please list the following info about your car:
-Fuel brand and octane used (i.e., Shell 93oct)
-Complete list of relevant modifications

We will limit the size of the test group so please don't be upset if it is closed before you get a chance to email us. It will be public soon enough :thumb:

Cheers,
shiv

iJeff · 12-09-2015, 05:28 PM

Quote:

Originally Posted by Shiv@Openflash

Sorry the delay guys. The logic board on my tuning laptop died over Thanksgiving. And the data on the HD wasn't recoverable until it was repaired. Not to self: Don't use applies Firevault encryption option when setting up your Macbook pro! Anyway, I have the revised Stage 2 files and they are ready for limited beta release.

Best Test Requirements:
-You must have both the Openflash header, OFT and stock airbag. Replacement drop-in panel filters and cat-back/over-pipe/mid-pipe upgrades are just fine.

-You must know how to record, download and email me a data log file

-You must use premium grade name-brand (Chevron, Shell, 76, etc,.) fuel. Not Costco, Rotten Robby, Arco, etc,.

-And all beta testing results are to be kept private between you and us via email. This means no posting data logs or trouble-shooting questions on the forum. It's a beta test after all!

So if you think you meet these requirements, please email me at shiv@openflashperformance.com. Please put "Stage 2 OFH beta test" in the subject line. And please copy and past the above requirements into your email and say "I meet these requirements!" Also, please list the following info about your car:
-Fuel brand and octane used (i.e., Shell 93oct)
-Complete list of relevant modifications

We will limit the size of the test group so please don't be upset if it is closed before you get a chance to email us. It will be public soon enough :thumb:

Cheers,
shiv

Emailed! Thanks for the work Shiv.

2much · 12-09-2015, 05:33 PM

in

Shiv@Openflash · 12-09-2015, 07:38 PM

oh, i forgot. This beta test is only for USDM 6MT cars.

iJeff · 12-09-2015, 07:39 PM

Quote:

Originally Posted by Shiv@Openflash

oh, i forgot. This beta test is only for USDM 6MT cars.

I emailed you already but didn't mention it. I do have a USDM 6MT.

2much · 12-09-2015, 07:44 PM

Quote:

Originally Posted by iJeff

I emailed you already but didn't mention it. I do have a USDM 6MT.

+1

12-05-2015, 07:35 PM	#58
D_Thissen Senior Member Join Date: Jan 2014 Drives: '13 Argento FR-S (Sold) Location: Ontario Posts: 2,126 Thanks: 3,209 Thanked 1,439 Times in 855 Posts Mentioned: 19 Post(s) Tagged: 2 Thread(s)	Hopefully the new tunes will be compatible with Borla/RevWorks/Tomei etc. __________________ My FR-S Build IG: dthissen

12-09-2015, 05:19 PM	#65
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,469 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	Sorry the delay guys. The logic board on my tuning laptop died over Thanksgiving. And the data on the HD wasn't recoverable until it was repaired. Not to self: Don't use applies Firevault encryption option when setting up your Macbook pro! Anyway, I have the revised Stage 2 files and they are ready for limited beta release. Best Test Requirements: -You must have both the Openflash header, OFT and stock airbag. Replacement drop-in panel filters and cat-back/over-pipe/mid-pipe upgrades are just fine. -You must have a USDM 6MT since we will only supply beta Stage 2 OFH files for calibration IDs ending in C (at this time) -You must know how to record, download and email me a data log file -You must use premium grade name-brand (Chevron, Shell, 76, etc,.) fuel. Not Costco, Rotten Robby, Arco, etc,. -And all beta testing results are to be kept private between you and us via email. This means no posting data logs or trouble-shooting questions on the forum. It's a beta test after all! So if you think you meet these requirements, please email me at shiv@openflashperformance.com. Please put "Stage 2 OFH beta test" in the subject line. And please copy and past the above requirements into your email and say "I meet these requirements!" Also, please list the following info about your car: -Fuel brand and octane used (i.e., Shell 93oct) -Complete list of relevant modifications We will limit the size of the test group so please don't be upset if it is closed before you get a chance to email us. It will be public soon enough :thumb: Cheers, shiv Last edited by Shiv@Openflash; 12-09-2015 at 07:39 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just how noticeable is OFT+OFH and stage 2 tune?	BBYZILA	Software Tuning	58	03-20-2018 11:56 AM
OFT 2.0 Stage 1 93 Tune	MurderRider	Software Tuning	57	03-21-2016 12:30 AM
Top Gear Solutions\| OpenFlash Tablet Tune\| Stage 1 Tune, Stage 2, Custom and E85	TopGearSolutions	Engine, Exhaust, Bolt-Ons	90	04-14-2014 08:15 PM
FA20club.com Turnaround Times On Modified Tune Files	FR-S Matt	Software Tuning	103	11-13-2013 01:48 PM
So whate does stage 3 tune do? I already have 2	Frsexxxy	Engine, Exhaust, Transmission	17	05-14-2013 06:30 AM

12-07-2015, 08:33 PM	#61
Captain Member Join Date: Sep 2015 Drives: 15' Raven FR-S Location: Bay Area Posts: 75 Thanks: 0 Thanked 4 Times in 4 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I'm a little confused on the update.. Is the new beta uel stage 2 91/93 oct available for those with no FI or the BPB? I apologize for the dumb question.

12-09-2015, 04:14 PM	#63
ss4max Junior Member Join Date: Feb 2015 Drives: FR-S Location: Pembroke Pines, Florida Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	OFT/OFH US 6MT 93oct user here. Interested in BETA when it becomes available. Thanks.

12-09-2015, 04:29 PM	#64
FR-Slide Senior Member Join Date: Apr 2013 Drives: 13 Whiteout 6MT Location: Raleigh, NC Posts: 246 Thanks: 104 Thanked 65 Times in 51 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Just to be clear, you have to have OFH to be considered for Beta, correct? A different branded UEL is not allowed/adequate? Will there be another beta for non-OFH UELs, or will the tune go straight to "market" after it clears OFT/OFH beta?

12-09-2015, 07:38 PM	#68
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,469 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	oh, i forgot. This beta test is only for USDM 6MT cars.

User Name		Remember Me?
Password