XXR 527/530 Gallery

[Vten]

Originally Posted by ZionsWrath

17x8.25 527 clear AP racing sprint kit? Anyone know?

I had the 17x8.25 +25 and it cleared my sti brembo .... I believe the ap sprint kit is Actualy shallower than the brembo.

[airwak]

Searched and found answer...weird

http://www.ft86club.com/forums/showthread.php?t=16450

[k.houan]

Originally Posted by B-R-Z

Caps are from this seller, at the moment it doesn't look like they have caps in black in this size for sale: http://www.ebay.com/itm/4x-universal...8a4ffb&vxp=mtr

Decals ordered from http://www.3dcarstickers.com/ You send them the image and they make a decal out of it for you.

What size decal do you need to fit on it?

[B-R-Z]

Originally Posted by k.houan

What size decal do you need to fit on it?

58mm. I attached the image I used if you wanted the same.

[Chrisgalactic]

Originally Posted by a.k.

hi guys!

so we have installed SPC LCA and dropped more - 1" front (max low)/ 1,7" rear. it was ok, but i got my Greddy EvoGT...it's more low than stock, so now I have some problems with sparks from the rear bumper need few inches upppp

That looks amazing! Very very nice good job! I hate to ask but what kind of lip is that? I have yet to see a lip that looks as perfect as the one you are rocking.

Sent from my SAMSUNG-SM-G900AZ using Tapatalk

[Mikeez]

Hey Guys,


I am in the market for XXR, I've been looking through post here.


XXR 530, 18x8.75 all around ET33 all around
With Tires: 235/35/18
Lowering Spring: Tein S (about 1.3" drop)


Concern: Will the front Poke?
Will there be rubbing?
Tire works or do I need to get the 40 ratio?

[swarb]

Originally Posted by Mikeez

Hey Guys,


I am in the market for XXR, I've been looking through post here.


XXR 530, 18x8.75 all around ET33 all around
With Tires: 235/35/18
Lowering Spring: Tein S (about 1.3" drop)


Concern: Will the front Poke?
Will there be rubbing?
Tire works or do I need to get the 40 ratio?

Poke, I would say no, but it also depends on camber.
No rubbing with those tires.
Tire works. Need depends on what you need. Diameter is a little small though. Otherwise search the thread. That size is the most popular size and you won't have a problem finding info if you actually looked.

[Mikeez]

Originally Posted by swarb

Poke, I would say no, but it also depends on camber.
No rubbing with those tires.
Tire works. Need depends on what you need. Diameter is a little small though. Otherwise search the thread. That size is the most popular size and you won't have a problem finding info if you actually looked.

You caught me =p. There is like 100 pages. I don't want to camber my wheels. Worst comes to worst, I will throw in a camber bolt.


That's good, I don't want it to poke. Alright, what you mean by diameter is small?

Thanks in advance

[swarb]

Originally Posted by Mikeez

You caught me =p. There is like 100 pages. I don't want to camber my wheels. Worst comes to worst, I will throw in a camber bolt.


That's good, I don't want it to poke. Alright, what you mean by diameter is small?

Thanks in advance

Actually, I was wrong. 235/35 is slightly smaller in diameter than stock, but it is maybe 1% difference aka nothing to worry about. It is an odd size. People usually get 225/40 or 235/40 which is much more common.

[Mikeez]

Originally Posted by swarb

Actually, I was wrong. 235/35 is slightly smaller in diameter than stock, but it is maybe 1% difference aka nothing to worry about. It is an odd size. People usually get 225/40 or 235/40 which is much more common.

Alright thanks =p

[kwest.papajohns]

Does anyone know what size tires or suspension set up this one has?

Originally Posted by JoeSubaru

XXR 18x8.75

+33 front
+20 Rear

[bansky]

Originally Posted by Chrisgalactic

That looks amazing! Very very nice good job! I hate to ask but what kind of lip is that? I have yet to see a lip that looks as perfect as the one you are rocking.

Sent from my SAMSUNG-SM-G900AZ using Tapatalk

hey it's common "frs front lip" from ebay))

Originally Posted by Mikeez

Hey Guys,


I am in the market for XXR, I've been looking through post here.


XXR 530, 18x8.75 all around ET33 all around
With Tires: 235/35/18
Lowering Spring: Tein S (about 1.3" drop)


Concern: Will the front Poke?
Will there be rubbing?
Tire works or do I need to get the 40 ratio?

- no
- no
- no

it will fit well

Originally Posted by kwest.papajohns

Does anyone know what size tires or suspension set up this one has?

225/35 but u have to drop

[BULLETTRAIN86]

I have the same set up xxr 527 18 by 8.75 with 225/40/18. And I was thinking the same thing getting wider meater tires but I'm just not sure if I should get the same what you might get 245/40 or 235/40. What do you think?? Any ideas or pictures with those tires?

Originally Posted by Mad1723

Asphalt FR-S with gold XXR 527s. 18x8.75 +35 on 225/40 tires, soon to be 245/35. Lowered on KW V3s, never measured the actual drop hahaha

[Slanksta]

heya Ace what size and offset are your beautiful blk chromium 527? Is that standard height n is there much poke? Cheers