WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 792 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DGMlJDlBRZ · 03-24-2015, 09:02 PM

Little teaser

This Saturday marks 1 year of ownership on the BRZ, so I decided to pick up a couple things for the car. Picked up some JDM Spec Buddy Club tail lights from fteightysix, and a Motiv Overpipe and Tomei 60S from FT86SpeedFactory. I'll post up some pics of the Tomei installed this weekend after the overpipe gets delivered on Friday. Can't wait

x1UP · 03-24-2015, 09:08 PM

Quote:

Originally Posted by DGMlJDlBRZ

Little teaser

This Saturday marks 1 year of ownership on the BRZ, so I decided to pick up a couple things for the car. Picked up some JDM Spec Buddy Club tail lights from fteightysix, and a Motiv Overpipe and Tomei 60S from FT86SpeedFactory. I'll post up some pics of the Tomei installed this weekend after the overpipe gets delivered on Friday. Can't wait

Do you have the pics of the JDM BC tail lights installed on your car? If you do, please post! If not, i'll wait!

Figo · 03-24-2015, 09:50 PM

Quote:

Originally Posted by JPxM0Dz

Looks good! Let me know where you picked up the replacement hose

evasivemotorsport.

You can email them.

x1UP · 03-24-2015, 09:59 PM

This is a future DIY question: does anyone know how to blackout the inside of the stock tail lights so that it'll have a blackout housing?

I think that would look pretty nice.

spdfreak · 03-24-2015, 10:31 PM

Soon...

TilesMeague · 03-25-2015, 01:44 AM

Quote:

Originally Posted by jsquared

Sure do...here you go.

Do they fit flush? I've got some ijdmtoy LEDs whose fitment I'm very disappointed with.

sactownbwoy · 03-25-2015, 03:09 AM

Got these in today, had the tires mounted, went to install them and broke down pissed at the world because www.evasivemotorsports.com sent me the wrong fitment. 5x120.

Apex ARC-8 17x9 +42 Dunlop Star Specs 255/40 17

chas3wba0 · 03-25-2015, 03:30 AM

Quote:

Originally Posted by x1UP

This is a future DIY question: does anyone know how to blackout the inside of the stock tail lights so that it'll have a blackout housing?

I think that would look pretty nice.

http://www.ft86club.com/forums/showthread.php?t=12312

It's been done quite a few times... seems like a challenging endeavor unless you have all the proper tools/experience, but I agree it does look mad sweet.

jsquared · 03-25-2015, 08:23 AM

Quote:

Originally Posted by TilesMeague

Do they fit flush? I've got some ijdmtoy LEDs whose fitment I'm very disappointed with.

They fit the same as the stock markers. I just made sure that I kept pressure on the housing when I installed the markers so that I got a good seat. Seems to have done the job.

pinski · 03-25-2015, 08:39 AM

Quote:

Originally Posted by sactownbwoy

Got these in today, had the tires mounted, went to install them and broke down pissed at the world because www.evasivemotorsports.com sent me the wrong fitment. 5x120.

Apex ARC-8 17x9 +42 Dunlop Star Specs 255/40 17

I would be beside myself with anger, especially after having the tires mounted.

Quote:

Originally Posted by jsquared

They fit the same as the stock markers. I just made sure that I kept pressure on the housing when I installed the markers so that I got a good seat. Seems to have done the job.

The fitment on the Helix is great - they have a slightly different design than stock though. There's a small kink out in the plastic lens so the markers are visible from the front of the car. IIRC, my stock side markers were flat.

that_one_guy · 03-25-2015, 11:21 AM

Quote:

Originally Posted by x1UP

This is a future DIY question: does anyone know how to blackout the inside of the stock tail lights so that it'll have a blackout housing?

I think that would look pretty nice.

Take a look at this thread:

http://www.ft86club.com/forums/showthread.php?t=12489

I've been researching for a while. Be sure to read all relevant links and responses because some good advice is hidden in these threads and this is not something you want to dive into unprepared.

chenga_ · 03-25-2015, 11:45 AM

Installed my catback, coils, control arms, toe arms and wheels

Crestwood1001 · 03-25-2015, 01:44 PM

Installed a set of Weathertech mats, along with ordering a proper plate frame to replace the one the dealership provided with the car.

Ganthrithor · 03-25-2015, 02:09 PM

Quote:

Originally Posted by Choco

Cleaned my engine for the first time. My weak girly arms are all sore but worth it.

Dirty engine (almost 30k daily driver) DISGUSTING

Cleaned. All naked now.

Hope my BRZ appreciates it.

Any methods you'd like to share? Mine's starting to look a little second-hand. How do you clean all the annoying little crevices and other hard to reach spots in there? Looks good!

03-24-2015, 09:59 PM	#11078
x1UP One & Done (AOZORA) Join Date: Jun 2014 Drives: '15 Series.Blue BRZ (WRB) Location: New York City Posts: 932 Thanks: 340 Thanked 217 Times in 160 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	This is a future DIY question: does anyone know how to blackout the inside of the stock tail lights so that it'll have a blackout housing? I think that would look pretty nice. __________________ "I have the need....the need for speed! - Maverick (Top Gun)

03-24-2015, 10:31 PM	#11079
spdfreak Senior Member Join Date: May 2013 Drives: GBS BRZ Limited Location: Chicago Posts: 191 Thanks: 296 Thanked 143 Times in 77 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Soon... __________________

03-25-2015, 03:09 AM	#11081
sactownbwoy Senior Member Join Date: Jul 2014 Drives: 2014 BRZ Limited Location: SoCal Posts: 168 Thanks: 112 Thanked 136 Times in 69 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Got these in today, had the tires mounted, went to install them and broke down pissed at the world because www.evasivemotorsports.com sent me the wrong fitment. 5x120. Apex ARC-8 17x9 +42 Dunlop Star Specs 255/40 17 __________________

03-25-2015, 11:45 AM	#11086
chenga_ Member Join Date: Sep 2014 Drives: 15 CWP BRZ 青空 Location: Toronto Posts: 12 Thanks: 0 Thanked 7 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Installed my catback, coils, control arms, toe arms and wheels __________________ Alex C. 15 CWP BRZ 青空 Invidia Q300 / Invidia Overpipe / Invidia Catless Frontpipe / MXP EL Header / KW V3 Coilovers / BeatRush Camber Plate / Cusco Rear Control Arms / Whiteline Toe arms / Rays Gramlights 57DR Mag Blue / Hankook V12 255/35/18

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 10:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) -- General Topics	8	03-31-2012 08:53 AM

03-24-2015, 09:02 PM	#11075
DGMlJDlBRZ Senior Member Join Date: Mar 2014 Drives: 2014 DGM BRZ Location: Oxnard, CA Posts: 323 Thanks: 189 Thanked 190 Times in 84 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Little teaser This Saturday marks 1 year of ownership on the BRZ, so I decided to pick up a couple things for the car. Picked up some JDM Spec Buddy Club tail lights from fteightysix, and a Motiv Overpipe and Tomei 60S from FT86SpeedFactory. I'll post up some pics of the Tomei installed this weekend after the overpipe gets delivered on Friday. Can't wait

03-25-2015, 01:44 PM	#11087
Crestwood1001 Member Join Date: Mar 2014 Drives: 2013 BRZ Limited (GBS) Location: NEPA Posts: 65 Thanks: 2 Thanked 14 Times in 10 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Installed a set of Weathertech mats, along with ordering a proper plate frame to replace the one the dealership provided with the car.

User Name		Remember Me?
Password