Advan RGD 18 x 8.5" (33) offset squared, no one? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OICU812 · 10-31-2013, 06:31 AM

Looked in wheel directory only staggered setups, looked online well everywhere for hours lol.

Hoping someone may have done this, don't care what color would just love to see how they look and fit especially in the rear. Since I know front is fine with bit of camber.

If you have these squared and can share a pic would be VERY helpful. Thx

RavSpec · 10-31-2013, 02:52 PM

similar setup / 18x9.0 +45mm (18x8.5 +39mm)

ADVAN RGD 18" Gold on White BRZ

CSG David · 10-31-2013, 03:32 PM

Quote:

Originally Posted by OICU812

Looked in wheel directory only staggered setups, looked online well everywhere for hours lol.

Hoping someone may have done this, don't care what color would just love to see how they look and fit especially in the rear. Since I know front is fine with bit of camber.

If you have these squared and can share a pic would be VERY helpful. Thx

If it looks good in front, it will probably be a little sunk in the rear.

OICU812 · 11-01-2013, 01:44 PM

Quote:

Originally Posted by CSG David

If it looks good in front, it will probably be a little sunk in the rear.

If 18x9.5" (40) = 18x8.5 (39) then 18x8.5" (33) would be 6mm outwards in back, maybe not too bad.... man wheels are SO DAMNED hard to know till they're on!!!

CSG David · 11-01-2013, 02:27 PM

Quote:

Originally Posted by OICU812

If 18x9.5" (40) = 18x8.5 (39) then 18x8.5" (33) would be 6mm outwards in back, maybe not too bad.... man wheels are SO DAMNED hard to know till they're on!!!

True story. Just like a 17x10 +44 on my S2000. I had no idea how it will fit until I actually the wheels. The only reason why I went with them was for the Essex AP Sprint BBK to fit and for the best possible usage of the 255 tire.

Looking for some wheels soon?

OICU812 · 11-01-2013, 03:12 PM

Ya David been full throttle on hunt for good, light squared set. Just want to see what Sema debuts then make up mind and jump on "something".

carloverx · 11-03-2013, 06:31 PM

Quote:

Originally Posted by OICU812

If 18x9.5" (40) = 18x8.5 (39) then 18x8.5" (33) would be 6mm outwards in back, maybe not too bad.... man wheels are SO DAMNED hard to know till they're on!!!

Careful, 18x9.5" (40) does not equal 18x8.5" (39).

OICU812 · 11-03-2013, 06:37 PM

Quote:

Originally Posted by carloverx

Careful, 18x9.5" (40) does not equal 18x8.5" (39).

Exactly how you mean? This all started when I was trying to figure out how 18x8.5" (33) offset squared wheels would look without spacers.

carloverx · 11-03-2013, 07:16 PM

Quote:

Originally Posted by OICU812

Exactly how you mean? This all started when I was trying to figure out how 18x8.5" (33) offset squared wheels would look without spacers.

A 9.5" wheel is 1" wider than 8.5". So both its inside face and outside face are 0.5" (12.7mm) further from the center of the 8.5" rim (i.e., the rim would "poke" +12.7mm more if they had the same offset).

The difference between 40 and 39 is only 1mm, which would just shift the faces inside by 1mm.

So a x9.5(40) pokes roughly +11.7mm more than x8.5(39), and roughly +4.7mm more than x8.5(33)

...i think

RavSpec · 11-03-2013, 07:37 PM

Quote:

Originally Posted by carloverx

Careful, 18x9.5" (40) does not equal 18x8.5" (39).

Typo, 18x9.0 +45mm

RavSpec · 11-03-2013, 07:52 PM

The reference was for 18x9.0 +45mm compared to 18x8.5 +33mm which is a 6mm differences.

9.5 was a typo.

leicaboss · 04-01-2014, 02:44 PM

I'm interested to see if anyone's achieved the square fitment...

King Tut · 04-01-2014, 02:48 PM

Quote:

Originally Posted by leicaboss

I'm interested to see if anyone's achieved the square fitment...

I had a square 18x9.5 +40 Advan RG-D fitment on my car. The 18x8.5 +33 will work just fine.

leicaboss · 04-01-2014, 02:49 PM

Quote:

Originally Posted by King Tut

I had a square 18x9.5 +40 Advan RG-D fitment on my car.

Thank you

Mainly asking because I want to go with 18x8.5 +33 on stock struts (Swift springs). Hopefully it will work

04-01-2014, 02:44 PM	#12
leicaboss Coffee Snob Join Date: Dec 2013 Drives: '14 SWP BRZ Limited Location: SF (Mission) Posts: 992 Thanks: 536 Thanked 395 Times in 250 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	I'm interested to see if anyone's achieved the square fitment... __________________ My Build Thread: Hannah, my '14 SWP BRZ Weekly SF/Daly City Meet: Tuesdays @ 7pm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
37 vs 45 offset - Advan RS	Symbiont	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	18	03-28-2014 12:12 PM
Advan wheels in "Machining Black", anyone got any? NEED good pic!!!	OICU812	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	09-19-2013 07:50 AM
WORK KIWAMI 18" x 9.5" + 18" x 8.5" +38 Offset	GC GTS Aero Kit	Australia Classifieds	16	03-22-2013 05:49 AM
Rays Volk-Racing TE37SL 18" & Yokohama Advan RS-II 18" wheels	eauto	Wheels and Tires	3	01-10-2013 05:50 AM

10-31-2013, 02:52 PM	#2
RavSpec Senior Member Join Date: Dec 2011 Drives: Rx7 Location: NYC Posts: 1,721 Thanks: 7 Thanked 473 Times in 232 Posts Mentioned: 71 Post(s) Tagged: 1 Thread(s)	similar setup / 18x9.0 +45mm (18x8.5 +39mm) ADVAN RGD 18" Gold on White BRZ

11-03-2013, 07:52 PM	#11
RavSpec Senior Member Join Date: Dec 2011 Drives: Rx7 Location: NYC Posts: 1,721 Thanks: 7 Thanked 473 Times in 232 Posts Mentioned: 71 Post(s) Tagged: 1 Thread(s)	The reference was for 18x9.0 +45mm compared to 18x8.5 +33mm which is a 6mm differences. 9.5 was a typo.

User Name		Remember Me?
Password