Unichip map downloads and tuning - Page 46 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

bakerr6 · 04-11-2013, 04:28 PM

Quote:

Originally Posted by Partial Stall

Will using this transmit invalid data to an OBD II scan tool? I ask because I use torque.

never tried, but I use the flux2 which provides a lot of good info.

Unichip Jack · 04-11-2013, 05:56 PM

Partial Stall... the only OBD2 data that would be affected would be MAF air flow rate... and the changes will be insignificant to what anything you might want to do with those values. All other PID's are unaffected.

Cheers

swift996 · 04-11-2013, 06:05 PM

Quote:

Originally Posted by Partial Stall

Will using this transmit invalid data to an OBD II scan tool? I ask because I use torque.

The only thing I noticed was I'd have a few rows of data for the same RPM, but it would show .1 sec for each in my data logs. Not sure if it's the unichip interfering or my settings with the phone/bluetooth. I bought a cheap USB plug in port but could never get the driver to work on Win8.

ScionFrsFan · 04-11-2013, 10:17 PM

Jack, would an aftermarket axle back benefit from running with cat included in a tune?

Thank you

bakerr6 · 04-12-2013, 05:36 AM

Quote:

Originally Posted by ScionFrsFan

Jack, would an aftermarket axle back benefit from running with cat included in a tune?

Thank you

Nope an axleback does not need a tune.

jwjknorr · 04-12-2013, 09:12 AM

Waiting on Aem tune with use of aem maf peice. Also will this tune come in a header and complete exhaust tune. Does anyone know where this can be tuned out at and fine tuned on a dyno in or around south jersey?

swift996 · 04-12-2013, 12:58 PM

Quote:

Originally Posted by jwjknorr

Waiting on Aem tune with use of aem maf peice. Also will this tune come in a header and complete exhaust tune. Does anyone know where this can be tuned out at and fine tuned on a dyno in or around south jersey?

Jack mentioned it should have been done yesterday so I'm hoping they can get the map family uploaded today. I'm installing a header this weekend. The map families come with header/exhaust options as well. I'm not sure if there's an authorized Unichip tuner in South Jersey. You might want to check their website. Otherwise, the tune should run pretty good.

Eric1855 · 04-14-2013, 08:20 PM

Can anyone recommend a Unichip tuner (with dyno) within a couple hours of Louisville, KY? Like the Cincy, Indy, Nashville area?

Appreciate it.

bakerr6 · 04-15-2013, 12:37 AM

Quote:

Originally Posted by Eric1855

Can anyone recommend a Unichip tuner (with dyno) within a couple hours of Louisville, KY? Like the Cincy, Indy, Nashville area?

Appreciate it.

That's where I've run into issues. I'm contemplating selling mine and buying ECUtek, just because I cannot find someone local that can tune with it. I had one guy working on it before, but he's given up and there's no shops around here that will tune it.

RandomHero · 04-15-2013, 09:32 AM

http://www.unichip.us/235-unichip-tuners-world-wide

you would be surprised how many tuners are out there. See if you can find anyone through here. If not remember that a lot of automotive engineers (the educated ones) are capable of tuning a car using most tuning solutions. If you have a favorite shop thats local why not ask them if they are up for tuning using the unichip?

bakerr6 · 04-15-2013, 10:05 AM

[Edited until further notice,

Thanks jack for the prompt response

swift996 · 04-15-2013, 10:20 AM

I got a hold of the AEM map (Fuel ~, Timing ~), I anticipate the map family will be uploaded today to the shared site. I'm anxious to try the Fuel ~ Timing +.

WOW! The right map made a world of difference. The Injen map I was running definitely showed improvement over stock, but now that I'm on the right map it makes me very happy that I went with the Unichip. It pulls much harder and smoother. It feels more direct and torquey. I instantly realized the intake was making more noise...two thumbs up, this car is really a blast to me again.

I'm excited to see how things work when I get the FA20Club header in and on. Stay tuned...

bakerr6 · 04-15-2013, 10:47 AM

Quote:

Originally Posted by swift996

I got a hold of the AEM map (Fuel ~, Timing ~), I anticipate the map family will be uploaded today to the shared site. I'm anxious to try the Fuel ~ Timing +.

WOW! The right map made a world of difference. The Injen map I was running definitely showed improvement over stock, but now that I'm on the right map it makes me very happy that I went with the Unichip. It pulls much harder and smoother. It feels more direct and torquey. I instantly realized the intake was making more noise...two thumbs up, this car is really a blast to me again.

I'm excited to see how things work when I get the FA20Club header in and on. Stay tuned...

Let me know how you like it!

Unichip Jack · 04-15-2013, 10:59 AM

As Swift996 said, the AEM map family is finished and will be posted shortly... my IT guy called in sick this morning so it probably won't be until tomorrow.

Swift996 - I'll email you that map shortly.

Cheers

04-11-2013, 10:17 PM	#634
ScionFrsFan Senior Member Join Date: Nov 2012 Drives: 2013 Scion FR-S Location: America Posts: 702 Thanks: 274 Thanked 119 Times in 79 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Jack, would an aftermarket axle back benefit from running with cat included in a tune? Thank you __________________ ScionFrsFan

04-15-2013, 10:05 AM	#641
bakerr6 Senior Member Join Date: Jun 2012 Drives: 2013 raven black fr-s Location: cincinnati, oh Posts: 1,447 Thanks: 503 Thanked 443 Times in 305 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	[Edited until further notice, Thanks jack for the prompt response Last edited by bakerr6; 04-15-2013 at 10:47 AM.

04-15-2013, 10:20 AM	#642
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 954 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	I got a hold of the AEM map (Fuel ~, Timing ~), I anticipate the map family will be uploaded today to the shared site. I'm anxious to try the Fuel ~ Timing +. WOW! The right map made a world of difference. The Injen map I was running definitely showed improvement over stock, but now that I'm on the right map it makes me very happy that I went with the Unichip. It pulls much harder and smoother. It feels more direct and torquey. I instantly realized the intake was making more noise...two thumbs up, this car is really a blast to me again. I'm excited to see how things work when I get the FA20Club header in and on. Stay tuned... __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

04-15-2013, 10:59 AM	#644
Unichip Jack Join Date: Dec 2012 Drives: E36 M3, Whiteout FR-S Location: Portland OR Posts: 235 Thanks: 3 Thanked 174 Times in 84 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	AEM maps As Swift996 said, the AEM map family is finished and will be posted shortly... my IT guy called in sick this morning so it probably won't be until tomorrow. Swift996 - I'll email you that map shortly. Cheers

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-11-2013, 05:56 PM	#632
Unichip Jack Join Date: Dec 2012 Drives: E36 M3, Whiteout FR-S Location: Portland OR Posts: 235 Thanks: 3 Thanked 174 Times in 84 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Partial Stall... the only OBD2 data that would be affected would be MAF air flow rate... and the changes will be insignificant to what anything you might want to do with those values. All other PID's are unaffected. Cheers

04-12-2013, 09:12 AM	#636
jwjknorr Senior Member Join Date: Oct 2012 Drives: FRS 2013 Location: South Jersey Posts: 139 Thanks: 13 Thanked 17 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Waiting on Aem tune with use of aem maf peice. Also will this tune come in a header and complete exhaust tune. Does anyone know where this can be tuned out at and fine tuned on a dyno in or around south jersey?

04-14-2013, 08:20 PM	#638
Eric1855 Senior Member Join Date: Jul 2012 Drives: LP DSP / CSP '13 BRZ Location: La Grange, KY Posts: 153 Thanks: 2 Thanked 100 Times in 45 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Can anyone recommend a Unichip tuner (with dyno) within a couple hours of Louisville, KY? Like the Cincy, Indy, Nashville area? Appreciate it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Let's get tuning! EcuTek tuning now available!	carbonBLUE	Southwest	6	06-29-2015 02:37 PM
Unichip EMS	Unichip Jack	Engine, Exhaust, Bolt-Ons	300	11-22-2014 03:13 AM
unichip	13 FR-S Veteran	Engine, Exhaust, Transmission	9	02-03-2013 11:05 PM
unichip	13 FR-S Veteran	CANADA	0	12-03-2012 05:31 PM

User Name		Remember Me?
Password