Single Exit Catback - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Mattybro410 · 10-30-2014, 09:58 PM

Hey i'm most likely going to get a single exit cat here soon but wanted opinions on the ones i've narrowed it down too, I really like the HKS, and Tanabe but because the Megan drift spec single exit is way cheaper I figure it should be considered has anyone had experience with these Ive seen the Tanabe reviewed on here but not the others, just enjoy the look, sound and lightness is always good. Thanks.

daibunjau · 10-30-2014, 10:24 PM

Tomei ti 60s

mike the snake · 10-30-2014, 10:59 PM

Every car will sound different depending on mods, FI, tune, and other exhaust pieces. This is a given.

I'm running the Tomei 80r on my FB turbo BRZ with full 3'' catless exhaust. It is loud, but has zero drone.

On my last car, my local muffler shop fabbed me up a single exit axle-back setup for under $200.

He put my car on the lift, and held many different mufflers up to the pipe so I could choose how my car sounded.

This was very cool, and I ended up very happy with my car sounding as good, or better than the expensive pre-made systems.

It didn't have the sweet welds, but it sounded awesome, looked identical from the outside, and cost $1200 less, and weighed 35 pounds less than the equivalent offering from BMW.

There are a few very nice single exit exhausts available as well.

I just wanted to mention that any good muffler shop can make a simple axle-back single exit exhaust (and probably offer to let you listen to different mufflers) for very little money.

*KID* · 10-31-2014, 12:50 PM

I love my tanabe concept g catback. Sounds very throaty

10-30-2014, 09:58 PM	#1
Mattybro410 Member Join Date: Mar 2014 Drives: 13' Scion FRS Location: Maryland Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Single Exit Catback Hey i'm most likely going to get a single exit cat here soon but wanted opinions on the ones i've narrowed it down too, I really like the HKS, and Tanabe but because the Megan drift spec single exit is way cheaper I figure it should be considered has anyone had experience with these Ive seen the Tanabe reviewed on here but not the others, just enjoy the look, sound and lightness is always good. Thanks.

10-31-2014, 12:50 PM	#4
KID 86-er Join Date: May 2012 Drives: BRZ tS Location: Laredo, TX Posts: 970 Thanks: 195 Thanked 253 Times in 175 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I love my tanabe concept g catback. Sounds very throaty __________________ 2018 Subaru BRZ ts 020/500 - My Daily, work car, and track car

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEW HKS HI-POWER TI-TIP SINGLE EXIT	genometuning	Engine, Exhaust, Bolt-Ons	18	01-06-2015 09:14 PM
FS (SoCal): FT86SpeefFactory V2 single-exit catback	jonbonazza	Engine, Exhaust, Bolt-Ons	10	10-04-2014 07:16 PM
single exit exhaust	jdmblood	Engine, Exhaust, Transmission	24	09-07-2013 04:27 PM
FS: Brand New T1R 70R Single Exit FRS/BRZ Catback	reggie@circuitsoul	Engine, Exhaust, Bolt-Ons	5	08-06-2013 03:56 AM
Aluminum single exit catback prototype	epson1	Engine, Exhaust, Transmission	40	08-11-2012 04:45 PM

10-30-2014, 10:24 PM	#2
daibunjau Member Join Date: Jan 2014 Drives: 2013 Scion FRS Location: SoCal Posts: 43 Thanks: 25 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Tomei ti 60s

10-30-2014, 10:59 PM	#3
mike the snake Senior Member Join Date: Jul 2013 Drives: 2013 BRZ Location: Norcal Posts: 1,592 Thanks: 1 Thanked 623 Times in 378 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Every car will sound different depending on mods, FI, tune, and other exhaust pieces. This is a given. I'm running the Tomei 80r on my FB turbo BRZ with full 3'' catless exhaust. It is loud, but has zero drone. On my last car, my local muffler shop fabbed me up a single exit axle-back setup for under $200. He put my car on the lift, and held many different mufflers up to the pipe so I could choose how my car sounded. This was very cool, and I ended up very happy with my car sounding as good, or better than the expensive pre-made systems. It didn't have the sweet welds, but it sounded awesome, looked identical from the outside, and cost $1200 less, and weighed 35 pounds less than the equivalent offering from BMW. There are a few very nice single exit exhausts available as well. I just wanted to mention that any good muffler shop can make a simple axle-back single exit exhaust (and probably offer to let you listen to different mufflers) for very little money.

User Name		Remember Me?
Password