Quote:
Originally Posted by solidsnake11
I bought a delicious tuning flex fuel kit at a scrap yard and the end that plug into the 02 sensor has only one grey wire. Could someone post a picture of that plug showing the wires.
Thanks
|
Ok that sounds like a 2017 + compatavle kit.
With the 2017+ cars you could not source the volts and earth from the rear 02 like you could on earlier cars. With the earlier cars signal volts and earth all sourced from rear 02 made very simple imstall
So the single wire going into the rear 02 socket is likely the sensor\signal wire back to the ecu.
What tune sysstem are you using to go flex ?? If its oft it doesnt support rear 02 conmect, you will need to reroute the sensor\signal wire to evap input on ecu
If ecutek it will accept either
And oft doesnt support 2017+ cars either
Hopefully thte kit has the volts and earth conmections that you will need to make