Quote:
Originally Posted by trevorovert
open flash headers finally shipping to me today, will be at DIY sometime mid next week after work installing if anyone wants to join me
|
FYI, torque these to 30-35 ft lbs. Don't go by stock numbers. I'm about to retorque mine this weekend to correct my slight ticking noise I hear on cold start. It's very minor if anything because I don't smell anything, but the aftermarket ones. I torqued mine to 22 ft lbs which is definitely not enough even by the feel test.
I'm picking up some crowfoot wrenches (mentioned in the JDL header thread) from Sears after work today to get to the runners easier. Otherwise you will want deep sockets and knuckle joints on a ratchet with an extension.
Enjoy the UEL rumble my friend. It's quite addicting.