View Single Post
Old 05-23-2012, 03:19 AM   #1
Drift-Office
Senior Member
 
Drift-Office's Avatar
 
Join Date: May 2012
Drives: AE86 / FRS / FC3S / GC8 / S14 / R32
Location: Auburn, WA
Posts: 789
Thanks: 633
Thanked 1,431 Times in 372 Posts
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
Drift-Office : BRZ vs FRS Dyno Day ~ Mini Meet 6/30/12

Date : 30th June 2012
Time : 1PM - Whenever?

Location : Drift-Office, LLC | 1535 Auburn Way North, Auburn, WA 98002


So I was thinking it would be a good opportunity for us here in the NW to have a get together and what better way is there than to have a meet-n-greet event over a dyno session? Besides, there will be a free flow of NOS Energy drinks on site.
It would also be a good time for a few of us to baseline our vehicles and see if there's any appreciable differences between the FR-Ss and the BRZs performance wise.

Dyno sessions are FREE for the 3 other participants :


1) BRZ 6AT ~ OPEN!!!

2) BRZ 6MT ~ OPEN!!! / WastaCamel (Tentative)
3) FRS 6AT ~ CNC Joel Staab (Confirmed)
4) FRS 6MT ~ DO virtual_bob (Confirmed)


The BRZ 6MT / 6AT spots are still open so if you're interested, LMK ASAP and I'll pen you in!


All vehicles attending above need to be 100% stock, engine and wheel wise - this way we get an apples to apples comparison. 6MT vehicles will go WOT in 5th gear while 6ATs will do so in 4th. (That's the 1:1 gear) Naturally, we'll do a run or two with the 4th and 3rd gears respectively too!


Naturally, there's going to be at least 2 non-stock BRZs and 1 FRS on stat...


BRZ AT : mechaghost (Confirmed)

BRZ MT : Tainen (Confirmed)
FRS MT : detainu (Confirmed)

There's a certain PRINT MEDIA guy on site coming too to cover what could be THE FIRST BRZ / FRS Dyno Day here in the US...
That said, who's down to come by and check this out?

Regards,

Last edited by Drift-Office; 06-27-2012 at 02:38 AM. Reason: Continually Updating...
Drift-Office is offline   Reply With Quote