Quote:
Originally Posted by churchx
solidONE: camberbolts for twins are for the front. No camberbolts for rear, where LCAs (or less commonly used options of UCAs or UCA eccentric bushings, with former non option due tight budget, and later - due PITA to adjust due press-in nature) are only camber adjustment options.
|
I'm currently using, and have been using for a couple years now, H&R camber bolts on the rear control arms. They've given about -0.5 to +0.5 of adjustment on either side. just enough to even out the camber using stock lower control arms.