KW V3 installation problem
Maybe someone here knows what is wrong.
In the front I adjusted the coilover height to the middle of the range according to the manual, installed it with HVT camber plates and it came in spot on 35 mm lower. Exactly in the middle of the range as expected. In the rear I set the height to the middle of the range as well, installed the coilover with the factory tops and it came in almost in stock height. Now I have set the coilover to the minimum height according to the instructions and the car is only 20 mm lower than stock. Same at both sides. At this setting it should have been 50 mm lower than stock. Anyone who knows why my car is 30 mm (11/4") too heigh?
For information I have also installed SPC rear control arms, but I can't see how they can influence the height. They are more or less identical to the stocks.
Thanks for input!
__________________
Enkei RPF1/K&N/Perrin crank pulley/Visconti Stg1/Perrin catback and overpipe/KW V3
|