Below are some photos of the past few weeks of work. Progress is pretty slow as the business always comes first... but progress is progress!
Picked up a set of Ohlins Road and Tracks. The front units are supposedly blown, so I will have to rebuild them sooner than later.
Lightweight flywheel and clutch on
Transmission bolted to engine
The drivetrain in the car
The coolant system needs some work. The PO had a dual filler deal going on, and one had the overflow welded shut. I wanted to re-use this radiator neck, so I worked on fixing this. Yes, I could have bought a radiator neck but wanted to try fixing the threads first.
I'm also a cooling snob, and while the kit came with a kit specific radiator and fans, I have to use ours as I know it is the best unit available for a factory bolt in ordeal. This lead me to fabricate our own coolant hoses.
Driver side
Passenger side
The only thing left on the cooling system side will be the radiator neck! Pretty excited to be able to fill the system up with coolant shortly.
Thanks,
Eric