Quote:
Originally Posted by 7 skulls
Dust covers are reused from the stock tops. I followed all the torque specs and had replacement subaru nuts for 3 on the top hat mounts and the nut at the top of the strut since these are all one time use. I also had new subaru 14mm camber bolts and nuts. No poppings noises, no grinding, all good so far. 250 km today over some rough roads, no problems.
I will try to do up a parts list of the nuts needed and post it here.
|
I ordered the pedders top hats.
20327CA010 x6 for the top hat nuts. I've never replaced them but I might do it this time around.
I will pair them with new OEM x4 crash bolts (901000394) and x4 nuts (902380008) to see if I can gain front camber similar to yours.