|
The black pieces are used as alignment guides/spacers. You join them together to make bigger spacers as needed.
First you measure the gap between the windscreen and the boot when it's closed.
Using this measurement use the table in step 3, for example, if you measured 7mm for the gap, then you'll need to make a 5mm foam piece by joining 1x2mm foam piece, and a 1x3mm foam piece.
You'll need to make three of these 5mm foam pieces. Then position your aero cover, and insert these foam spacers between the cover and the boot.
All this is to ensure that the gap is big enough so that it doesn't obstruct the boot from opening, yet just small enough.
|