Quote:
Originally Posted by Dezoris
I need to talk
|
I had the same issue, kept hearing a squealing that sounded like metal on metal contact, found that like 3 days after installing the kit, put zip ties under the support bracket so it couldn't shift down then tightened it up really tight.
I also found that the infeed tube was being pushed down slowly by the heat shielding on the bottom side of the hood, cut a 6x6 inch piece out and put wear tape around the infeed tube, if the pully makes contact with that tape, burning rubber will be smelled for quite awhile.
Been about 2 months now and no contact. But I still hear metal on metal contact when going from a flat straight to a upward hill... Been chasing it, I don't think it's in the engine bay at this point.