This is the second and the better option. I was strapped for time and had to complete mine. Didn't want to pull the front bumper. Sometime in the future I will and undo the wires that I've run
After installing the stalk and fogs remove the front cover.
Find the connector that the turn signals plugged to. On the drivers side the red/white wire or 12v power for the fogs will be in that connector. Either splice into the wire there and run it to one side of the Drivers fog connector and the other to a convient ground location. Do the same on the drivers side but the wire will be the white/red.
Here are some pictures of the connectors behind the front cover.