Quote:
Originally Posted by funwheeldrive
Thanks, that makes sense. I get using the spacers on the bottom between the trunk and cover, but am I supposed to use the spacers on the sides as well?
Also, am I supposed to let the prep dry fully before my final placement?
|
I prepped it first with the alcohol wipe and then the primer wipe. Lined it up and measured each end to make sure it was centered. I used one large spacer for the middle for the gap and then I believe I combined one large and one small spacer for each end area. I used three spacer locations to line it up total, then I removed the adhesive backing from the stabilizer. Made sure it was still lined up properly and then pressed down evenly to secure it.