Quote:
Originally Posted by Foobar
Excellent! Will be doing this over the weekend. I can't really tell from the pic - is that grommet on the trunk used for the trunk release button? Looks like that whole panel screws off?
Finally, I like the look of that Rydeen - any chance you can spread your good deal around to us FT86Club members?
By the way, the lines/text are from the camera itself I believe. At least that's how other cameras have worked for me.
Here - found this on Rydeen's site:
|
The grommet had nothing running through it, seemed like it was basically made for a back up cam/ rear laser diffuser.
The Rydeen camera does have its own lines, I had already disabled them, the ones on the screen are in fact from the Radio, when I first hooked it up it had both sets of lines.
Basically I had to connect two green wires in the camera cables to disable those.
Quote:
Originally Posted by sparks
Was the ground on pin 15 required to activate the camera?
What did you use to power the camera? Back-up lighting?
|
I have not tried it without the pin in the harness but I do know when that wire wasn't grounded I did not get the camera to come on, so I would say yes.
And yes I used the reverse light wire to power the camera.