Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - 2013 BRZ won't turn over replaced starter, battery, st cut relay

dewittk · 12-13-2018, 06:05 PM

So I have been racking my head against a wall on this one. It started with a worn TO bearing. So I replaced clutch, flywheel, to bearing and clutch fork. After putting ever thing together now all I get is a click from the starter tell me the solenoid is activating but it is not attempting to turn over.
I have already replaced the battery and starter after bench test showed bad starter. Also while checking the electrical system found the ST cut relay which is normally open had shorted at 2 points. So that was replaced after all of this the starter is still clicking.
Anyone have any ideas?

Sent from my SM-G965U using Tapatalk

12-13-2018, 06:05 PM	#1
dewittk Junior Member Join Date: Aug 2014 Drives: 2013 BRZ Location: SLC Utah Posts: 8 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	2013 BRZ won't turn over replaced starter, battery, st cut relay So I have been racking my head against a wall on this one. It started with a worn TO bearing. So I replaced clutch, flywheel, to bearing and clutch fork. After putting ever thing together now all I get is a click from the starter tell me the solenoid is activating but it is not attempting to turn over. I have already replaced the battery and starter after bench test showed bad starter. Also while checking the electrical system found the ST cut relay which is normally open had shorted at 2 points. So that was replaced after all of this the starter is still clicking. Anyone have any ideas? Sent from my SM-G965U using Tapatalk