Quote:
Originally Posted by axelthrasher
For this, you can swap the BRZ STI TS gauge face and needles to your old (USDM) cluster. This means you get to keep your same mileage without having to go to the dealer. The problem is that BRZ STI TS cluster ONLY will display in KM/H (the speedo and the LED/LCD display). When you swap to your cluster - you can still at least retain the MPH reading on the LCD/LED display.
NOTE: When you swap the faces the STI numbers/letters no longer show in white - the stock USDM cluster has red LEDs, so it eliminates the white. For me, this is perfect as I prefer a red display at night, rather than a white/red as the STI has.
Wrong. Do not spread incorrect information. You can swap to a used cluster without issue.
Wrong. Do not spread incorrect information. You can swap to a used cluster without issue.
|
if paired (tS in only with keyless) with previous exchange keyless of entry system you need to perform NBC alignment as mentioned in car's fabric procedure of Subaru. You can only associate
new cluster (in keyless data enter) without alignment as it is unpaired and pairing is set on AUTO on NBC when accessing. Misalignment may produce temporary failure and ECU lock. See SSMIII procedure for better understanding.