|
Figured I would just let everyone KNow i got my Open Port and successfully flashed my car without much issue..
However a couple of things..
1. I would update the original post, as the latest version of ECUFlash comes with the definition files needed, no need to do anything other than download ECU Flash
2. I had an issue from the start where my OpenPort would not finish reading my rom, it would get about 20% and fail.. I tried a million things then simply just swapped USB ports and it worked just fine. I even put it back in the original USB port I had it installed in and it happened again. I know that USB port is fine however I know some devices can be picky about how good its connection is and an "acceptable" error rate.
So if you have similar issues just try swapping the USB port you're in.
|