Quote:
Originally Posted by HeresMyMind
tuning with clear lenses requires you to remove the projectors from the inside of the housings, and then remove the lenses with a flat blade screw driver, you then put the new lenses in, and then have to tune the shield by bending special tabs that hold it in place and trimming a 2ndary shield with a dremel. if you have never done headlight work before it can be tricky, but if you take your time you are fine.
3 year old bulbs that have been used a fair amount will realistically be around 75% of the brightness of new bulbs.
-B
|
Thanks for the info that's a bit more involved than I had originally thought. I will start with new bulbs for better output, but still need to take care of my leaking tail lights first...