Quote:
Originally Posted by tomm.brz
So for people who wants to remove maf to use another input, you just set Full SD with the flaw that the driveability will be kinda sloppy right?
the maf% trim slider you set is to try adjusting better the fuel. trims on the fly?
thanks for the response
|
We can setup pure SD for users if they choose, just be aware that the drive-ability will work on some cars but not all cars. We have discussed this with EcuTeK over the years and they do believe that there may be something else at play deep in the code of the ECU that causes the SD to still rely on the MAF a bit.
The MAF trim % scaler if for adjusting the trims a bit more/on the fly correct.
Cheers,
William