Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Flash02 · 03-25-2019, 07:43 PM

Okay so my issue was using the BNC connections in the iDatalink harness, apparently those connections do not provide enough power to the amp. I cut the BNC connections off and wired direct to the Pioneer main harness. All is good. Before it sounded like pillows were covering the speakers.

Sent from my iPhone using Tapatalk

03-25-2019, 07:43 PM	#16
Flash02 Member Join Date: Oct 2017 Drives: 2017 Subaru BRZ Limited Location: Elizabeth City, NC Posts: 42 Thanks: 12 Thanked 19 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	2017+ BRZ and Maestro RR Okay so my issue was using the BNC connections in the iDatalink harness, apparently those connections do not provide enough power to the amp. I cut the BNC connections off and wired direct to the Pioneer main harness. All is good. Before it sounded like pillows were covering the speakers. Sent from my iPhone using Tapatalk Last edited by Flash02; 03-26-2019 at 08:20 AM.