Quote:
Originally Posted by drewbot
Which is pretty difficult to do not on a track....
|
Actually, I don't think I would have ever been able to bed my Carbotechs in at the track in my Miata, I always did it on the street (empty backroad). Just too much time between hard braking events when on a technical track in a momentum car on RComps.
My process for bedding track pads on an empty backroad. This is assuming a properly functioning brake system, recently bled with good fluid/lines, etc.
Accelerate to 70-75 -> 10. REPEATEDLY. Back to back to back to back........however many times it takes for the brakes to STINK and the pedal to start going soft.
Gingerly drive home touching the brakes as little as possible, let cool to ambient.
Done.