Quote:
Originally Posted by kev60625
I didn't disconnect my battery...dumb on my part
|
Use a Stanley knife to cute the shelf trim centrally along a straight line from the rear to the front of the car. SO much easier to fit or remove then and just pull out and push back under the panels.. If the join at the cut bothers you, cover the shelf with black felt.
I have cut my dash-mat too. They always shrink and holes e.g. over the vents near the doors become misaligned. Now it is easy to slide the mat back over the holes from time to time. The centre cut will gap about 30mm eventually so cover with e.g. a strip of felt about 45mm wide.