Quote:
Originally Posted by Bonburner
Can you elaborate on this?
So if I go buy a RX350's bixenon projectors from toyota, they slide right into the fr-s's H11 sockets? And the electric connection fits and everything?
edit - also, if I'm interested in the Morimoto HID kit, should the '13 fr-s be H11A or H11B?
Edit 2 - nevermind, it looks like H11B. Feel free to confirm.
My other question is can you run H1 HID's DRL and High beams? Or will I lose the DRL functionality?
https://www.theretrofitsource.com/h1...ect_restrict=1
|
I mispoke, you need to purchase a used set of RX330 Non-AFS projectors off ebay and make sure they are the xenon / D2S bulb projectors. they bolt directly into the OEM FRS housings, but they are LOW beam only. They are a 2.5" lens. The RX350 BIXENON ones you mentioned are a 3" lens and will not bolt directly in without modification.
Ontop of the projectors install, you will need to purchase D2S Hid Bulbs, and D2S ballast and adapters to plug the ballast into your OEM low beam wiring.
-B