Proceed at your own risk, I'm not responsible for any harm to yourself or your car that occurs while following this guide. Always be careful when under a motor vehicle, ensure it is properly supported at all times.
REAR INSTALL PROCEDURE
NOTE:
- The first step is to break loose the lug nuts on the rear wheels. Use a breaker bar, as most torque wrenches should not be used to untorque nuts.
- Place wheel chocks in front of the front tires.
- Next, jack up the front of the car.
NOTE:
- Ensure all tools have been removed from underneath vehicle
- Install the lug nuts to finger tightness while wheel is in the air
- Once on the ground, torque lugs in a star pattern to 89 ft-lbs
- Most torque wrenches should be returned to 0 ft-lbs when not in use.
