Did what i wanted to do from the first day i got my FRS
I aint wanted 86 airbag cuz its expensive - and to be honest - looks worse then FRS / SUbaru one - cuz logo is just pressed in instead of normal one...
Soooooooooo
I jumped to my local junkyard - and cut Toyota logo from Toyota Corolla airbab along with background. Got home - removed it from the plastic / rubber background - and found out that Scion logo is smaller then Toyota sign... Hmmmm
I removed Scion logo from airbag, and started cleaning place for the new logo background. Used my dremel with sanding head to clean out all the unesesary plastic, and to make surface clean and flat.
After sanding down scion logo background - it was time to trim down Toyota logo back cuz it was a bit too thick. So sanded it down as thin as posible to make new Toyota logo sit flush with the surface.
Sanded Toyota back as flat and thin as posible:
Once got everything even and flush - used some superglue to glue backround in place.
Once background is glued - i did the same with the Toyota logo
Its sitting nice and flush now.
All the work took me like 30 min
And its well worth it over buing 86 airbag
Will get better pics once i put back my interior:
