Quote:
Originally Posted by Racecomp Engineering
If you know anyone with a camber gauge, see if you can borrow it to double check the numbers.
- Andy
|
I don't but I did take it to another shop to get just an alignement check and the numbers were the same. I also went back to the shop to confirm the .08 is toe in. When talking to the shop about this though his explanation was kind of interesting.
He said that .08 is acutally "zero" toe since it is in the middle of the factory range. I looked confused and he said this is a very common misconception that a measured toe of.00 is not actually straight in the sense of 0 like camber. Is this accurate? If not I will try putting the toe back to zero and go from there before adding more camber back in the rear.