Quote:
Originally Posted by lazyluka
I am not sure about if the 1 degree camber difference on your rear axle could be an issue or not as seen on your earlier post. You may need rear camber adjustment? Again ask the experts, I am not one.
@ Racecomp Engineering may be able to offer you some advice, or you could try reading/asking in this thread if you have time: http://www.ft86club.com/forums/showthread.php?t=45554
For lowering springs, the RCE ones seem very highly recommended.
You don't necessarily have to have a lower car with coilovers and handling mods, while lowering does add it's own benefits, it's not a requirement.
|
The guy who aligned my car said it was good. I know camber isn't adjustable with stock arms. Only toe is.
Sent from my iPhone using Tapatalk