View Single Post
Old 04-24-2015, 11:56 AM   #8
funwheeldrive
Senior Member
 
Join Date: Jan 2014
Drives: BANNED FOR TELLING THE TRUTH
Location: MODS ARE ON A POWER TRIP
Posts: 3,447
Thanks: 7,830
Thanked 3,022 Times in 1,409 Posts
Mentioned: 38 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by drifter-s View Post
The spacers are used to adjust the gap between the stabilizer and trunk lid. They have adhesive to stick the spacers together if you need a larger gap or to better center it all the way across. You do not stick the spacers to the stabilizer or trunk lid.

Place them in between the stabilizer and trunk lid and leave them there until you remove the strips to the adhesive on the stabilizer. Once the stabilizer is secure, remove the spacers.

You don't need a large gap between the trunk lid, but give yourself enough to keep clear of the trunk lid and stabilizer rubbing.
Thanks, that makes sense. I get using the spacers on the bottom between the trunk and cover, but am I supposed to use the spacers on the sides as well?

Also, am I supposed to let the prep dry fully before my final placement?
funwheeldrive is offline   Reply With Quote