Quote:
Originally Posted by RandomHero
Easiest route: Buy an amp with High Level inputs
Slightly more advanced:
A line output converter. Because its a full signal you can use it on speakers or a sub with appropriate crossover points. Only problem is the "Sub" volume control on whatever headunit you are running will have no effect. You would have to boost the lower frequencies yourself, which is often possible on line converters (many have built in eq's) or your HU.
:happy0180:
|
One last question, the amps I have in mind do speaker level inputs, would I be tapping into wires (A) or (B)?
(A)
White = LF Speaker amplified out (black line means -) [PIN 1 and 5]
Grey = RF Speaker amplified out (black line means -) [ PIN 2 and 6]
(B)
Green = Left speaker signal input from HU [PIN 3 and 9]
Purple = Right Speaker signal in from HU [PIN 4 and 10]