Quote:
Originally Posted by darthfrs
Using this procedure tonight, crossing my fingers.
Just did a full 6speed swap. The only thing untouched was the engine + engine harness. I had left the AT ECU in the car, hoping to flash a MT over it. No such luck.
Grabbed a MT ECU, installed it and tonight I'll be using the software listed and the proper cable to hopefully change the VIN and complete the 30min pin jump.
Doing this so I can then use my Ecutek software to recognize my original VIN with the new ECU and flash my new MT tune. Wish me luck!
|
Unless the ecu was locked you should be able to flash any rom you like to it, done many of these now no issues auto to man or other wsy round usa to austrslian no issues