Quote:
Originally Posted by SuperTom
I have the wilwood old wrx brakes up front so im sure I could just buy the rotor hat in 5x114 config keeping everything else the same. But still wouldn't be sure about the inner hat dimension being big enough.
|
Measure the inner hat of what you have if they are dual drilled. If the hat is 140mm this hub will work with that rotor.
Quote:
I would say this mod would be better in the beginning stages before wheel and brake purchases have already been committed to.
|
You're telling me.
Grey car day 3: (stock brakes)
Day 45: (FHI 4/2)
Day 730: (STi Brembos - pic is more recent that 2 year mark but i did a little makeover that included the brakes at 2 years)
[img]https://lh3.googleusercontent.com/UViXOHjQtKX8LUP4EhXKp55d6gZg-NTzBbj41pMXS_fy8zhssG2P_naMUqy9OPzLv07GjBJWO4K_DfY f0mA4***_ZsS2xFhk80n8H-SVu3bhOy0l_uYAMJuY3OC2D0BBnRSh5i1tMQ=w2400?.jpg[/img]