Some pics and info from my install... Hope they help someone in some way.
Side Airbag Cancellers
According to vendors of the Bride side airbag canceller... the resistor should be of the 2.2 ohm variety.
2.2 ohms (A52NPO): VW, PORSCHE, TOYOTA 86, Mazda ROADSTER(ND) etc. SUBARU BRZ, IMPREZZA(GJ, GP),LEGACY(BM, BR), WRX(VA), FORESTER(SJ), LEVORG(VM)
3.3 ohms (A54NPO): SUBARU IMPREZZA(CG, GD, GH, GR), FORESTER(SF, SG, SH), LAGACY(BC, BD, BF, BG, BH, BE, BP, BL)
P/N: A52NPO
I added adhesive-backed felt paper to the top of the sensor and the hook side of the velcro on the other. The cushions now hold tight. Hopefully I do not come across any issues with the sensor.
These pics illustrate how I ran my harnesses under the seats...
I used double-sided tape on the back of the occupant weight sensor module along with zip ties. I also used a few standoffs.
Passenger Side
Driver Side
Driver Side Seat...
Hopefully I don't run into any issues once everything is installed...
__________________________________________
projekt zeal86 build
zeal.eightsix Facebook
Instagram @zeal.eightsix