Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Kirby64 · 03-23-2015, 11:14 PM

@Fizz, here's a pic of the setup under the hood:

I've got the brass T supplied by FBM as part of the turbo kit. It splits into the turbo oil feed, and a grease gun extension to relocate the pressure sensor as you can see in top right. I followed this guide loosely: http://forums.nasioc.com/forums/show....php?t=2301886

You can see the original oil pressure sender wire with the green wire. It's just hanging out and I zip-tied it out of the way.

@Basket Case, here's a pic of my setup:

There's a guy on Mazda forums called block8head (you can google him) who makes these custom pods. They're a bit expensive, but they replace the stock window defroster insert and look really OEM.

03-23-2015, 11:14 PM	#30
Kirby64 Member Join Date: Jun 2013 Drives: Galaxy Blue BRZ Location: Austin, TX Posts: 32 Thanks: 0 Thanked 16 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@Fizz, here's a pic of the setup under the hood: I've got the brass T supplied by FBM as part of the turbo kit. It splits into the turbo oil feed, and a grease gun extension to relocate the pressure sensor as you can see in top right. I followed this guide loosely: http://forums.nasioc.com/forums/show....php?t=2301886 You can see the original oil pressure sender wire with the green wire. It's just hanging out and I zip-tied it out of the way. @Basket Case, here's a pic of my setup: There's a guy on Mazda forums called block8head (you can google him) who makes these custom pods. They're a bit expensive, but they replace the stock window defroster insert and look really OEM.