Because all I ever found was write-ups on how to install BRZ Headlights, I decided to make a DIY video on YouTube. This video shows one how to repin, and what connector is need for the install and how to go about installing the headlights. I recorded it on my phone simply because I don't have a camera to record so the quality isn't all that and a bag of chips.
In the description of the video, I listed out what you need for the install.
Basically, you need:
Flathead Screwdriver
10mm Ratchet
BRZ Headlights
8-pin female headlight housing connector
(part no. 90980-10897) which is about $15 USD each, and
you need TWO so that makes it a total of $30 USD.
And thats pretty much it. The video goes into depth about installing the lights and how to repin the headlights. Thanks for watching, hope this helps out the very few audience this mod targets. Haha