Quote:
Originally Posted by BatStig
I already have the Trackspec vents. Fender liners will be fully intact once I remove the brake ducts I no longer need thanks to my lovey CSG pads. I am upgrading my radiator and I will make sure that all stock foam and air guides are in place. I am just trying to get as much air to get through the stack as possible.
While searching for anyone who had used the Ace Scoop, I found a post from you from 2021:
That sounded exactly like what I was looking for. Unfortunately, this turning into a waste of time as I can't get a response from Ace. It looks like a JDL Bash Bar and some DIY ducting will be a part of my winter plans.
Thank you @ CSG Mike! |
FWIW I have an ACE Shroud Installed.
Shows pretty easily what you need to do for install and drilling for IC Piping, this is Harrop Install.
The hoses are now wrapped with 1" Heater Hose so they don't chafe