Quote:
Originally Posted by Chimera
I hate how these threads turn into this. I came looking for information on cold startups on e85, because my car when running e85 sometimes stalls immediately after start up, and I think it is probably bad for the cars health.
What I found is not very helpful though..
At least people are still active I guess :-)
|
have a read of the tune tweaks link below
then go to wayno's tune s link in tune tweaks post and copy appropiate tables to your tune
http://www.ft86club.com/forums/showthread.php?t=83945
you will need waynos modded defs as some of those tables not in standard oft defs
these
- Cranking Fuel Injector Pulse Width A (ECT)
- Cranking Fuel Injector Pulse Width B (ECT)
- Cranking Fuel Injector Pulse Width C (ECT)
- Cranking Fuel Injector Pulse Width D (ECT)
- Cranking Fuel Injector Pulse Width E (ECT)
- Cranking Fuel Injector Pulse Width F (ECT)
also copy the MAF after start tables
for quiet start you will need idle spped adjustments
TABLES CHANGED FOR QUIET COLD START:
- Idle Speed Target A
- Idle Speed Target B
- Idle Speed Target C
- Idle Speed Target D
- Idle Speed Target E
- Idle Speed Target F
- Ignition Timing Post Start
- MAF Correction After Start (In Gear)
- MAF Correction After Start (Neutral)
read the romraider tips below if not familiar with romraider