Not speaking as an authority, but yes it will work (based on my experience).
I installed a similar setup (exact wheels sizes) (tires: 245/35 & 265/35) about a week ago and on stock suspension I'm clear in the rear, and have roughly 5mm clearance in the front. After 150 + miles no rubbing even at full lock.
My RCE Yellow springs are scheduled to arrive tomorrow. According to RCE, the fitment should remain good. However, Myles says that installing crash bolts will reduce clearance further.
Quote:
Originally Posted by SpeedFromSwede
Would a staggered setup of Enkei Raijin's (18x8.5 front, 18x9.5 rear with 235/45 in front and 265/35 in the rear) work on stock suspension or with just lowering springs? Both have a +45 offset I think.
|