Quote:
Originally Posted by reeves
Does anyone know how to torque the bolts back on the flywheel/pressure plate without spinning them?
|
You need a tool to hold the crank pulley. I made my own using to steal from an old bed frame. You are only doing the flywheel bolts so the torque will be really low so you may be able to get away with removing your drive belt and then get creative with wrapping the belt in a way that it will hold your crank.
for example this video:
[ame]https://www.youtube.com/watch?v=JnkcnqF_S3c[/ame]
But something like this would be the correct way:
https://www.amazon.com/CTA-Tools-761...70_&dpSrc=srch