View Single Post
Old 02-12-2013, 06:49 PM   #90
Gixxer86
Member
 
Join Date: Jan 2013
Drives: Scion FR-S (Asphalt)
Location: Inland Empire
Posts: 85
Thanks: 21
Thanked 13 Times in 10 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
I also pulled my airbag and had an issue at first... It is because there is a third clip on the bottom of the airbag. There is a hole that looks just like the ones on the side, and you just push the rod towards the middle of the steering wheel, just like you do through the holes on the sides.
Also... The fuses, all three, are for the horn according to the diagram on the back of the fuse box cover. None of them are for the airbag. With that said, i dont think it would matter much. People pound and lean on their horns in road rage, that's not what would set them off. Unless you short a wire or something, you should be fine. I would be more focused on making sure you support the airbag as you release it and pull it out so you dont damage the wires/connectors in the back.
To the OP: THANK YOU for the write-up, helped alot in wrapping the trim piece underneath the airbag :-D
Gixxer86 is offline   Reply With Quote
The Following User Says Thank You to Gixxer86 For This Useful Post:
Synack (02-18-2013)