View Single Post
Old 08-23-2018, 12:28 AM   #9
jflogerzi
Senior Member
 
jflogerzi's Avatar
 
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,529
Thanks: 1,999
Thanked 2,013 Times in 1,457 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by Scala View Post
Thank you steve99, very good of you.

This tS will see mostly track days, very little DD and my expectation from the engine is mostly in the improvement of the mid-range.

My own contribution to the project is a catted UEL header, 93 RON and a very elementary plug and play method of tuning. I could always run without the tune but I'd be foregoing the benefit of the high octane while I'd be taking risks with the AFRs.

This is the reason of my interest in the OFT but I fear that, without support from OFT, going beyond simple icon selections will be well beyond my non-existent skills.

Again, many thanks.
If you can swing the OFT tablet its nice for logging as its a compact device, powered via the car. Shiv and his company are very busy so unless you buy an e-tune or request a one time quick look at your logs for new OFT customers I am not sure what other "support" he needs to provide. Hence open source.

I would suggest OFT + an e-tune from the like of @steve99 @Tor or @Waymo
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's
jflogerzi is offline   Reply With Quote