Quote:
Originally Posted by pwells
I installed these yesterday and completely ruined the threads in one of the holes by cross threading it, had to buy a M14x1.5 tap & die and re-tap the hole (taps that size are very expensive).
Don't make the mistake I did. If the bolt isn't going in by hand, take it out and try again, don't force it!
|
Exactly, you really need to take care off because you will really get fucked.
In my case, like I say I in the first post, one bolt are come very hard to screw after 2 turns cause of some metal appear into this during I unscrew them.
It's an easy mod who can become really bad.
Like I say and all others say, take you time and follow our advices.